How can I repair a broken door handle?
1. First unlock the central control button
2. Pry open the screw cover with a flat-head screwdriver (just behind the handle, pull up the handle with your left hand, pry with your right hand with a flat-head screwdriver), and remove the screw counterclockwise with a Phillips screwdriver.
3. Remove the screws inside the decorative shell of the handle with a flat-head screwdriver.
4. Remove the door decoration plate, pry up the door plate with a flat-head screwdriver, make it have a gap with a Phillips screwdriver, find the door decoration plate card, there are more than one, to pry off. Then push the screwdriver between the gantry and the clip and give it a hard push. And then the door trim goes up, and there's a glass inner strip above the door trim that's stuck to the door trim and then hung to the door, and this action is to pull it out. Be careful not to break the horn line with too much force. If it's not easy to get off, grab the underside of the door trim with both hands and shake it up and down.
5. Remove the door decoration plate and you will see 3 wires: an inner pull wire, a small horn wire and a door and window controller wire. First remove the line of the small horn. Observe the horn plug carefully, press the elastic buckle on the plug and pull it out downward. Next remove the inner pull cable. The specific step is to hold the hand near the fixed place of the cable and push down the damaged handle with your thumb until the cable pops out. Last step: Hold the door and window controller on the inside of the door trim plate and push the whole controller upward. Then observe the plug and press the elastic buckle on the plug. Pull the plug downward.
6, the door decoration plate is much easier to remove. Use a Phillips screwdriver to remove just four screws, never mind the order. Remove the damaged handle and then remove the trumpet. Gently and carefully pry the horn out with a flat-head screwdriver. The trumpet is very fragile, if you have to break the handle clip, it will be replaced anyway.
