SAIC MG350/360/550/750 AUTO PARTS CAR SPARE Reverse light switch -12 models -10064820 Power system AUTO PARTS SUPPLIER wholesale mg catalog cheaper factory price.

Novice drivers must learn: car lights use a full master
First of all, let's get to know the toggle lever light switch on the car. This is what it looks like. You can find it on the center console. In addition, there is a knob type light switch, which is also widely used. The lever type light switch is the most used form at present and is generally accepted by the public. In addition to the danger alarm lights (that is, we often say the double flashing lights) need to be pressed separately on the center console, the lights of the whole car can basically be controlled through this rod.

1. Left and right turn signals

Lift the lever up to turn on the right turn light, press down to turn on the left turn light, and bring the lever back to the center position to turn off the turn signal. The left and right turn signals are the ones we use most frequently during driving, and in addition to making left and right turns and lane changes, they can also be used for silent communication with drivers in front and back. For example, if you are behind a car and want to pass or change lanes, you can turn on your left turn light in advance. If the car in front responds in the same way (using the right turn light), it means that he has given you permission to pass or change lanes. It should be noted that if the front car also plays the left turn light, and the body is also slightly to the left, this is not necessarily to deliberately block you, it is likely that he is reminding you that it is not suitable for changing lanes at this time, such as the car coming to the direction or the lane narrowing. At this point, you should patiently wait for the front car to turn right to signal you to change lanes.

2. low light, high beam

Turn the rotary switch at the top of the light lever to the low light sign to turn on the low light. In low light mode, turn the lever in your direction to switch to the high beam, and then hook it back to the low light. In the light environment at night driving turn on the low light can be. The high beam is direct and shines farther, which is suitable for roads without lighting. However, when following the car or meeting the car at close distance, we must switch to the near light, otherwise the strong light of the high beam will directly hit the opposite car or the driver in front of the car, which is very easy to cause traffic accidents. Isn't it a little scary to imagine that the driver's field of view will be greatly hindered by direct headlights?

3. Outline lamp

Turn the pointer of the light lever over this sign to turn on the outline light. The outline lights are mainly lit with double flashes at dusk, when the light is not enough at night, or when the vehicle stops at the side of the road with fault. The brightness of the front and rear indicator lamps is not high, and can not replace the use of low light lamps.