How to install window mud groove
Remove this screw first. Use the pry board to remove the frame buckle slowly
Snap it open with a pry board and pull it open with your hand
When the glass comes down here you can see the two screws and when you remove the glass you have to loosen it and then you have to do it slowly and I'm in charge of the glass. Pull the mud out and the glass can be pulled out from the outside
And then you can put in a new mud tank and you can start at the corner and you can put in the bottom half.
Get a small screwdriver, a large screwdriver, and a t-20 screwdriver. Use a small screwdriver to pry the little black lid off the side of the door.
Remove the screw with the t-20 cone, pry up the bar with the big word screwdriver, and gently break the bar upward.
Put the disassembled laminate in a soft place so that the bright side of the laminate outside the window will not be scratched.
