It was more and more difficult to open the oil cap, for fear that one day it would not be able to open the oil and cause the car to stop driving, so I decided to replace the oil cap lock motor by myself. In addition, rain or car wash refueling mouth below the water, by the way together. The new fuel tank cap latching motor is back. Part number 95101001, is our Zhuomeng (Shanghai) Automobile Co., LTD. The refueling port base must be removed to replace the tank cap motor. The first step is to use a T20 screwdriver to remove the fastening screws in the red box in the figure below. The second step is to pry out the four clasps in the red circle in sequence. The bottom or top order can be adjusted from person to person, but you should pry the bottom first and then the top, because the bottom is relatively easy. With a pry bar, lifted by hand, and finally, by chance, took it off. Before removing the base of the refueling port, cover the refueling port with a towel to prevent foreign matter from entering. Remove the two buckles above the base of the refueling port, and the change is finished.
