Oil filter base oil leakage consequences!
Oil filter base pad oil leakage is one of the most common parts of the engine oil leakage, because the oil filter base is in a high temperature and high pressure, corrosion environment. After a long time, the oil filter base pad is prone to aging, and the rubber of the sealing ring will lose its elasticity, so the oil will leak out from the sealing ring. This is the main reason for the oil filter base pad oil leakage, then the oil filter base pad oil leakage consequence is that the oil will leak from the gap, and then the engine appearance will have a lot of oil stains. The oil filter base pad is generally located in the front of the engine, and the engine belt drive device is generally below, which is easy to leak on the engine belt. After such a long time, the belt is easy to be corroded, because the main component of the belt is rubber, which will become expanded and elongated after encountering oil. And easy to cause the belt to slip, easy to break the belt. The second effect is that when the leakage is more serious, it will cause the engine oil level to be too low. If you do not add oil for a long time, it will cause engine damage and. The last point is that the oil filter base pad is the place where the oil and antifreeze heat exchange. If the oil filter base pad leaks oil, it is easy to lead to oil and antifreeze string. It will make the oil into a large amount of water, it will also make the antifreeze into a large amount of oil, which will lead to the engine cooling system and engine lubrication system failure. Continuing to drive will cause very serious consequences such as engine cylinder pulling and axle holding. Therefore, the filter base pad should be repaired immediately after the oil leak, and then clean up the serious oil leak, it is also recommended to replace the belt.
