Do I need something between the license plate and the car?
License plate as one of the most important signs of a car, is one of the most easy to pay attention to many traffic police. But as a car owner, this is also the most easily ignored place, especially for the installation and maintenance of license plates. So for careful owners may find that some places of the DMV in the license, will install a layer of shockproof pad, that the shockproof pad need not be installed?
Do I need something between the license plate and the car?
Well, there's no exact answer, because it depends on the car. But the following cases are recommended to pad the following:
1. Expensive vehicles, the license plate is easier to scratch the float paint vehicles. Although the scratched part is covered by the license plate, but as the owner of their own car or add a layer of shock cushion.
2. The car's license plate fixing screw is shorter than the license plate screw. Some models due to the design of the vehicle did not leave enough length of the screw hole when the installation of the license plate, so the license plate can not be tightened, this time it is necessary to cushion the shock.
3. Older vehicles. The screws on the license plates of these vehicles have rusted and aged, causing the license plates to resonate or make noise when the vehicle is driving. At this time, the installation of shockproof pads will effectively improve the situation.
Plate shock pad installation
1. First of all, the shockproof pad after the adhesive paper is torn off, in order to make the shockproof pad closely fit with the license plate.
2. Install the shockproof pad in the corresponding position of the license plate, and pay attention to the threaded hole when the license plate is installed on it.
3. Install the license plate and fasten it with screws to prevent the license plate from loosening.
