Is the rear coaming cutting bad for the car?
Rear-end collision is likely to occur in the process of driving, causing damage to the rear coaming. Because the rear coaming of general vehicles is welded with the body, sometimes 4S shops or repair shops will suggest cutting the rear coaming and welding the new rear coaming. Today we will talk about the disadvantages of cutting the rear coaming to the car:
The rear coaming of a car is the tailgate of the trunk. Some owners worry that the rigidity of the car is not good after cutting. Don't worry too much about this. New materials will be welded on the back coaming after cutting, so no parts will be missing due to cutting. And after the coaming a total of 2 layers, the outer layer is covered by iron sheet, the internal structure is the frame, will only cut outside, will not change the frame. Therefore, after cutting the panel on the rigidity of the vehicle is very small, do not worry.
If the accident is more serious, the whole need to cut, we must ensure the welding process, to not seriously affect the strength of the vehicle body. So after the rear coaming is cut, the car will depreciate in the second-hand market. In the second-hand car market, dealers and customers believe that the service life, safety performance and handling performance of the vehicles in the major accident are comparable to that of the original cars, which will greatly depreciate. If you can repair the rear coaming, try not to cut, usually take the repair method, it will be better, if you can not avoid cutting, must find a professional maintenance organization for maintenance.
