Front door lifter switch
How to disassemble the glass regulator switch:
1. Remove the assembly on the door, then lift the glass up, the lifter will have screws to fix the glass, unscrew the screws, then unscrew the fixing screws of the lifter, and then take out the glass;
2. It should be inclined, otherwise it cannot be taken out, and then unplug the thread. Generally, the end of the thread is on the inside of the door, that is, the part between the door and the fender, and you can see it when you open the door. It can be taken out by unplugging the line;
3. The glass regulator switch on the main driver's door is a combination control switch and the main switch, and the others are auxiliary switches. If you want to replace it, you need to remove the door panel first, unplug the connecting wire and then remove the switch. If If you are not familiar with it, it is best to go to a professional repair shop to deal with it.
To replace the control switch assembly of the window regulator switch, it is necessary to remove the door lining, disconnect the wire end connection, and then remove the screw that fixes the switch from the inside to remove the switch. It is recommended that the switch be replaced by a repair shop.
To replace the window regulator switch, you need to disassemble the interior door panel, pull out the plug of the switch inside, and then unscrew the fixing screw to take off the switch. It is recommended to disassemble it in a repair shop.
