• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-6108111_Side-door-limit-block_S00000 zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:6108111

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-Side-door-limit-block-S00000
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 6108111
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-6108111_Side-door-limit-block_S00000
HAD-6108111_Side door limit block_S00000

Product knowledge

 

The function of the car side door stop block

The core function of the car side door stopper (i.e., the door stopper) is to limit the opening angle of the door, preventing it from opening too wide and colliding with adjacent vehicles, walls, or pillars. At the same time, it also enables the door to remain open on slopes or in strong winds without closing automatically.
Specific functions
Limiting maximum opening angle: Prevent excessive outward swing of the door to avoid damage to the door and body sheet metal.
Maintaining the open state: When parked on a slope or in strong wind, the door will not automatically close, making it easier for passengers to get in and out.
Protecting the vehicle structure: Reducing the impact force during closing and protecting the door lock mechanism, sealing strip, and hinges, extending the service life.
Common types
Rubber spring type: Simple structure, low cost, most commonly used in economy cars.
Spring type: Low noise, long lifespan, common in European brand models.
Electronic/electric type: Commonly seen in high-end or intelligent electric vehicles, capable of precisely controlling the angle, supporting anti-clamping and intelligent linkage.
Usage reminder
When the stopper fails or is damaged, the door may open too wide and collide with obstacles, or fail to close properly, making more noise, and may cause the hinge to loosen and the door to sag over time. It is recommended to check and replace it in time.
To remove the car side door stopper, the core is to first remove the door interior panel, then unscrew the fixing screws using a socket wrench. The entire process can be completed in about half an hour.
The stopper (stopper) is generally fixed between the door and the body. The common fixing methods are two screws on the door and one screw on the body, mostly in 10mm specification.
Preparation tools
Cross wrench: To remove the interior panel screws
10mm socket wrench: To unscrew the fixing screws of the stopper
Plastic pry bar: To pry the interior panel latch to avoid breaking
Lubricating oil/anti-rust lubricant: To apply when reinstalling to prevent abnormal noise
Gloves: The edges of the door are sharp, so wear gloves to prevent scratches during disassembly and assembly.
Disassembly steps
Safe parking: Choose a flat area, engage the handbrake to prevent the vehicle from moving.
Remove interior panels: Unscrew the screws at the armrest, use a plastic pry bar to lift the clips from bottom to top. Move slowly and avoid using excessive force. Pay attention to the electronic door plug; first unplug it, do not pull it forcefully.
Locate the limiters: After removing the interior panels, they can be found near the door hinges. For some models, you need to remove the waterproof film or sound insulation cotton to see them.
Unscrew the fixing screws: Use a 10mm socket to remove the two screws on the door and one screw on the body. If the screws are too tight, tap them lightly a few times, but do not use too much force.
Remove the limiters: After removing the screws, take them out through the speaker hole or the opening of the interior panel. If it is too tight, apply some lubricant to assist and do not forcibly pull.
Notes for Attention
Different models have significant differences: The structure and fixation methods of limiters for sedans, SUVs, and MPVs are different. Before operating, it is best to consult the repair manual or ask a professional technician.
Don't force the removal: After removing the limiter, the door opening and closing will lose restrictions, and it is prone to hitting surrounding objects. During driving, the door may accidentally open, posing safety hazards. If you are unsure, it is recommended to go to a repair shop.
Reinstall with lubricating grease: It is not easy to reinstall once removed. Before reinstalling, apply some lubricating grease on the limiter to prevent corrosion and abnormal noise.
Check the clips: Before reinstalling the interior panel, check if the plastic clips are missing or damaged. If so, replace them in time.
If it's just a noise from the door, it doesn't necessarily mean the limiter is broken. You can try cleaning and lubricating it first. In most cases, it can be fixed for about 40 yuan by yourself. Only severe wear and tear requires replacement.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products