• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-6107314_Right-front-door-sealing-plug-II_S00000 zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:6107314

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-Right-front-door-sealing-plug-II-S00000
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 6107314
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-6107314_Right-front-door-sealing-plug-II_S00000
HAD-6107314_Right front door sealing plug II_S00000

Product knowledge

 

What is the sealing plug for the left front door of the car?

The left front door sealing plug is a functional rubber/elastic plug installed on the reserved process holes, wiring holes or assembly positioning holes of the left front door panel. It is a small core component of the door sealing system.
Basic Attributes and Position
The main material is mostly EPDM rubber, silicone or TPE elastomer, with a temperature resistance range of -40℃ to 90℃.
It is directly embedded in various reserved holes on the inner side of the left front door panel without using glue. It achieves sealing by relying on the material's elastic rebound force and the interference fit with the hole wall.
The appearance is mostly black circular or irregular small rubber plugs. They are easily overlooked if not deliberately observed on a daily basis.
Core function
Sealing Protection: Sealing off holes to prevent rain and dust from entering the internal cavity of the car door, avoiding rusting of metal parts and short-circuiting of circuits due to moisture.
Sound Reduction: Reducing wind noise and road noise that enter the car through the holes, assisting in improving the quietness of the cabin.
Buffer Protection: Some sealed inserts with buffering structures can absorb the slight impact force when the car door closes, reducing the noise of the door closing.
Process Sealing: Covering the positioning holes and wiring holes that are no longer used after the vehicle assembly is completed to prevent foreign objects from falling into the interior of the car door.
Daily Maintenance Key Points
When washing the car, use a damp cloth to wipe the surface, remove the attached mud and sand to avoid accelerating the aging and cracking of the rubber seal.
When finding the rubber seal has fallen off, deformed or cracked, replace it with the original factory specification part with the appropriate hole diameter in time. Do not leave the hole empty for a long time.
Do not randomly remove the intact sealing seal; otherwise, it will directly cause problems such as water leakage, dust entry, and increased noise from the car door.
The core function of the left front car door sealing seal is to seal the reserved holes in the car door panel to build a hidden protective barrier for the car door. It can be divided into four core functions:
Sealing Protection
Fully sealing the process holes and wiring holes to prevent rain and dust from entering the internal cavity of the car door.
Avoiding rusting of the internal metal parts of the car door and short-circuiting of circuits due to moisture.
Reducing interior dust accumulation and preventing mold growth inside the car door.
Sound Reduction
Blocking the noise channels formed by the holes, reducing the transmission of external wind noise and road noise into the car.
Eliminating the "whirring" noise caused by air leakage through the holes during high-speed driving, improving the quietness of the cabin.
Buffer and Shock Absorption
Using its own elasticity to absorb the impact force when the car door closes, avoiding rigid collisions of metal parts.
Reducing the noise of door closing and enhancing the heavy feel of the door closing, reducing the wear of the door hinge and lock.
Industry tests show that it can reduce the wear rate of the car door hinge by approximately 30%.
Process Sealing
Covering the positioning holes and process holes that are no longer used after the vehicle assembly is completed to prevent foreign objects from falling into the interior of the car door.
Some models can also assist in fixing the inner waterproof rubber film to avoid the film shifting and losing its effectiveness.
Replacing the left front car door sealing seal is very low in operation threshold. The entire process does not require removing the interior panel, and it can be completed with bare hands. The core steps are: select the appropriate matching model, clean the hole position, and press the seal in place.
Preparations
Purchase the original factory specification sealing seal that matches the model and hole diameter exactly. Preferentially choose the TPE rubber material.
Prepare a flat plastic pry bar, isopropyl alcohol wet wipes, and a clean cloth to avoid scratching the car door panel with metal tools.
Choose a windless environment with a room temperature of 10°C or above to operate to avoid the rubber hardening and losing elasticity due to low temperature.
Remove the old sealing seal
Use the plastic pry bar to gently pry the edge of the sealing seal, allowing the seal body to separate from the panel hole wall.
Hold the exposed part of the sealing seal and slowly pull it out, do not use brute force to pull it causing the seal body to break and remain in the hole.
If the old seal is already broken, use a pointed-nose clamp to extract the remaining fragments to avoid them falling into the car door cavity.
Clean the installation hole position
Use isopropyl alcohol wet wipes to repeatedly wipe the inner wall and surrounding area of the panel hole, thoroughly removing mud, oil stains, and old glue residues.
Dry the water with a dry cloth to ensure the hole position is completely dry, avoiding the new seal from slipping or shifting after installation.
Check if there are any burrs on the edge of the hole, if there are slight burrs, use fine sandpaper to smooth them out to prevent cutting the new sealing seal.
Install the new sealing seal
Align the new sealing seal with the cleaned hole, first insert the edge of the seal body into the hole wall.
Apply even force with your palm to press the surface of the seal body, making the entire seal body fully fit into the panel hole until the edge and the panel surface are flush.
Confirm that the seal body is fully clamped around, and gently bend it without loosening or warping.
Final Inspection
Switch the left front door 3-5 times to confirm that the sealing seal has not been squeezed out.
Spray a small amount of water around the seal body to check if there are no signs of water leakage at the hole position, and confirm that the sealing is effective.
Try to minimize the frequent opening and closing of the car door within 24 hours, allowing the rubber to fully rebound and fit tightly against the inner wall of the door.
Notes for Attention
Do not use glue to attach the sealing plug. The interference fit is the original factory standard fixing method. Gluing will make it impossible to remove later.
Do not use a metal screwdriver to forcefully pry the old plug. It is very likely to scratch the car door's sheet metal and cause rust.
If the hole position has severely deformed and lost its roundness, it is necessary to first repair the sheet metal hole before replacing the new plug. Otherwise, the new plug will not be able to be fixed.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products