• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-5302100_SVentilation-cover-assembly_M00666 zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:5301810E

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-SVentilation-cover-assembly_M00666
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 5302100
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-5302100_SVentilation-cover-assembly_M00666
HAD-5302100_SVentilation cover assembly_M00666

Product knowledge

 

What are the components of the car ventilation cover?

The automotive ventilation cover components are mainly classified into several categories based on their functions and installation locations: the ventilation cover plate below the front windshield, the engine hood ventilation opening, the interior air conditioning ventilation cover plate, and the dedicated ventilation opening components for batteries or battery cells.
The ventilation cover plate below the front windshield: a plastic cover plate below the wiper, its core function is to guide the airflow into the air conditioning intake and prevent rain and debris from entering the vehicle. The latest patent from BYD Toyota designs an adjustable seal on the cover plate, which not only ensures the stable operation of the air conditioning but also reduces the wind resistance coefficient by 2-3 counts and extends the range by at least 2 km. The patent from Eris Auto improves the sealing and appearance quality by installing an elastic retaining ring at the wiper shaft hole, reducing the gap from 10 mm to 4.5 mm. The ventilation opening on the engine hood: located above the engine hood, its main function is to dissipate heat and intake air, especially important for turbocharged vehicles or in hot regions. The typical structure is injection molding, and the internal channels utilize the Venturi effect to generate negative pressure for suction, with a three-dimensional structure with guide fins reducing the engine compartment temperature by 12-15°C (based on SAE J1634 test conditions). The interior air conditioning ventilation cover plate: used to control the air supply or opening degree in a local area of the vehicle. Changan Automobile has applied for a patent for the ventilation cover plate of the elbow pillow box, controlling the opening degree of the ventilation holes through a switch component and drive component, allowing convenient operation even when the box contains items. The ventilation component for batteries/electrodes: designed for safety in case of thermal runaway of electric vehicles. General Motors has applied for a patent for a ventilation opening deflector for prismatic electrodes, controlling the airflow direction through a movable cover at the opening. Another patent from Changan Automobile sets up an installation opening under the B-pillar of the vehicle, using a variable air guide component and a wind deflector to selectively supply air to the passenger compartment.
The core function of the automotive ventilation cover components is to balance the pressure inside and outside the vehicle and prevent external debris from entering the vehicle. Specifically, it mainly performs the following tasks:
- Balancing the pressure inside and outside the vehicle: When closing the door, the vehicle door will bring in some air, and the ventilation cover can discharge this air to the outside to avoid excessive pressure inside the vehicle and make it easier to close the door; when operating the air conditioning in the external circulation mode, the incoming air also exits through this opening, forming an air circulation.
- Adjusting pressure during vehicle acceleration: When the outside air flow is fast and the pressure is low, the air flow in the vehicle will flow out through the ventilation cover to the outside, helping to maintain pressure balance.
- One-way dust prevention design: It is usually a one-way louver structure, allowing only the air inside to flow out, preventing dust and dirt from flowing back into the vehicle from the outside.
If this component fails or is missing, the window is prone to fogging, affecting the driver's line of sight and posing safety risks.
In addition, if you are asking about the ventilation opening on the engine hood, its function is different - it mainly serves to dissipate heat from the engine compartment, helping the engine maintain an appropriate operating temperature, and also has noise reduction and decorative functions.
If the ventilation cover component fails, the most common issue is that the drainage holes of the ventilation cover plate (rainwater collection plate) are clogged, causing rainwater to enter the air conditioning intake. The ventilation cover plate is the "guard door" of the air conditioning intake system. When leaves, sand, and other debris accumulate, water will seep into the vehicle through the air conditioning filter, and in severe cases, water will accumulate under the carpet and the wiring harness will get damp, even causing electrical faults.
Common failure manifestations:
- Poor ventilation, reduced air volume: The filter screen or air duct of the exhaust port is blocked by dust, reducing the ventilation effect.
- Abnormal noise: Internal motor damage or loose fan wheel, resulting in excessive noise during operation.
- Odor generation: Accumulation of internal oil and bacteria, resulting in a unpleasant smell from the air being blown out.
- Unable to start: Abnormal power connection, damaged switch, burned-out wiring, or motor failure.
Water infiltration in the vehicle: After the drainage holes are blocked, the rainwater overflows and enters through the external air intake of the air conditioning, soaking the air conditioning filter and seeping into the underside of the vehicle carpet.
Suggestions for inspection and handling:
First, clean the drainage holes: Remove the rainwater collection plate, clean up fallen leaves and sand, and clear the drainage holes. For some models, this part needs to be disassembled to remove the wiper and clips, as it is not convenient to do by oneself. You can go to a repair shop for handling.
Check the air conditioning filter: If the filter is damp, it indicates that water has entered, and it is necessary to replace it and check if there is water accumulation in the air duct.
Check the water accumulation under the carpet: Lift the floor mat, check if the sound insulation cotton is damp. The water accumulation needs to be dried promptly; otherwise, it is prone to mold and rust the wiring and electrical appliances.
Check the motor and circuits: When ventilation is poor or the vehicle cannot start, use a multimeter to measure the power supply voltage, check for short circuits or open circuits in the circuits, and then check if the fan motor is stuck or damaged.
If there is already water accumulation under the carpet, it is recommended to go to a repair shop to disassemble and dry it promptly, and conduct a comprehensive inspection of the vehicle's electrical circuits to avoid the expansion of potential hazards.
If the fault points to other ventilation components, such as the crankcase ventilation valve (exhaust valve), the symptoms are different: excessive oil consumption, idle shaking, acceleration weakness, and blue smoke from the exhaust pipe. It is necessary to check the oil separation and ventilation pipeline.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products