• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-5301810E-Front-Water-Sink-Assembly zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:5301810E

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-Front-Water-Sink-Assembly
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 5301810E
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-5301810E-Front-Water-Sink-Assembly
HAD-5301810E Front Water Sink Assembly

Product knowledge

 

What is the front water tank assembly of a car?

The automotive front water channel assembly usually refers to the water channel (also known as the rain collector, water guide plate) located below the front windshield, at the junction between the engine compartment and the front windshield, beneath the wiper.
Its core function is to collect the rainwater flowing from the front windshield, introduce it through a grille to the drainage holes on both sides, and discharge it from behind the tires to prevent water from seeping into the engine compartment and damaging the electrical circuits.
Main structure
Front windshield cover plate: A plastic decorative panel with a grille, which intercepts debris such as leaves and sand.
Main drainage channel: Usually in an U-shape, with a certain slope to guide the water to the sides.
Sealing structure: Sealing strips to isolate the front engine compartment from the upper side of the cover plate to prevent water infiltration.
Drainage holes and drainage pipes: Located at both ends of the water channel, connected to the hidden drainage pipes inside the A-pillar or fender.
Maintenance points
Regular cleaning: Fallen leaves and willow catkins are prone to block the drainage holes. It is recommended to check once every quarter, and once a month during the autumn and spring leaf-fall seasons.
Cleaning method: Open the hood, remove the wiper arm and the deflector plate fasteners, and use a soft-bristled brush or a low-pressure water gun to rinse the debris inside the channel.
Sign of blockage: If there is a musty smell in the car, the floor mat is damp, or the drainage slows down (single drainage takes more than 30 seconds), it is necessary to clear it in time.
Note: When cleaning, avoid the engine compartment wiring and sensor plugs to prevent electrical short circuits.
The automotive front water channel assembly (also called the front water guide plate, rain collector, or water guide plate) mainly functions to guide the rainwater and wash water flowing from the front windshield and the windshield wiper fluid to be discharged outside the vehicle orderly, preventing water from seeping into the engine compartment or inside the vehicle. At the same time, it can also reduce wind noise, support the base of the wiper arm, and make the front of the vehicle lines more neat.
Core function
Drainage and diversion: Collect the rainwater flowing down the front windshield, and through the side drainage holes and hidden drainage pipes, discharge it to the bottom of the vehicle to prevent water from flooding into the engine compartment or the air conditioning intake.
Protection of electrical equipment and sheet metal: Prevent water from seeping into the engine compartment and affecting electrical components, and also avoid the sheet metal of the vehicle being damp and rusting for a long time.
Noise reduction and support: Reduce wind noise during high-speed driving, and also serve as the base for installing the wiper base and water spray nozzle.
Aesthetics: Cover the gap between the engine compartment and the front windshield to make the front of the car cleaner.
Maintenance reminder
Regular cleaning: Fallen leaves, sand, and small insects can easily block the drainage holes. It is recommended to check once every quarter, and use low-pressure water to rinse the drainage holes when washing the car to see if the water flows smoothly from the bottom of the vehicle.
Pay attention to aging: Plastic parts will become brittle and crack after long-term exposure to the sun, and loose fasteners may cause wind noise or water leakage. If any abnormalities are found, handle them promptly.
Check signals: If there is a musty smell inside the car or the floor mat is wet, it is likely that the drainage pipe is clogged or fallen off, and you should check the water flow channel as soon as possible.
Car front water trough component failure: The most common is the blockage or leakage of the water drainage trough below the front windshield, causing rainwater to not be able to be discharged and seeping into the engine compartment or the interior of the car. First, determine the specific symptom and then deal with it accordingly.
Common fault manifestations
Leaking inside the car: The driver's seat or passenger seat carpet is damp, usually due to the blockage of the water drainage trough after water accumulation overflow, or the aging and failure of the sealing strip.
Engine compartment water ingress: The water trough does not drain properly, and water seeps into the engine compartment, which may damage the circuitry and cause rusting of components.
Abnormal noise or water sound: If the water trough is filled with debris such as leaves and sand, it will affect drainage, and there will be a gurgling sound of water after rain.
Solution
Clearing blockages: Open the engine hood, remove the wiper and the drainage triangle plate, take out the water trough, use a soft-bristled brush to clean the leaves, sand, and other debris, and then rinse the drainage pipeline with a water hose to ensure that the water can flow smoothly out.
Repair the seal: If there is still leakage after cleaning, check the water trough seal strip. Minor aging can be temporarily remedied with automotive-specific glass glue or snake glue; for severe aging, it is recommended to directly replace the seal strip or the entire water trough component.
Check the drainage pipe: A fallen, flattened, or aged drainage pipe can also cause leakage, especially the drainage pipes with joints. When the joint ages, water will seep into the interior of the car. If conditions permit, replacing the integrated improved part is more reliable.
Special reminder
It was discovered that the carpet in the driver's cabin was completely soaked. The seats should be removed immediately for drying, and the steering column and other key parts should be checked for rust. At the same time, the electrical safety should be tested to avoid the expansion of potential hazards.
Before each rainy season, the sealing strips should be inspected. The water drainage channels should be cleaned once every six months, which can effectively prevent most malfunctions.
The structure and disassembly methods of the water channels vary for different vehicle models. Before attempting any disassembly, make sure to confirm the specific situation of your vehicle model. If unsure, it is recommended to go to a repair shop or 4S store for handling.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products