• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-530168370_Shield-Left-Lower-Installation-Support_S00666 zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:530168370

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-Shield-Left-Lower-Installation-Support_S00666
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 530168370
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-530168370_Shield-Left-Lower-Installation-Support_S00666
HAD-530168370_Shield Left Lower Installation Support_S00666

Product knowledge

 

What is the left shielding - lower part - installation support for the car?

"The left shielding - lower part - installation support" usually refers to the support or bracket for the lower part of the vehicle body on the left side. It is mainly used to fix the lower shielding plates, mudguards, etc., and prevent them from loosening or falling off during driving. This term is more similar to the description found in parts catalogues or repair manuals. The specific parts corresponding to different vehicle models may vary. Common types include:
Lower shielding installation bracket: A fixing piece connecting the front bumper or vehicle frame to the lower shielding plate. It is usually used in conjunction with snap fasteners to ensure the shielding plate is firmly attached to the vehicle body.
Chassis support block/support point: Special support points located on both sides of the vehicle body at the position near the wheels, used for lifting the vehicle with a jack. They are typically about 20 centimeters behind the front wheels and about 20 centimeters in front of the rear wheels.
Side skirt shielding support: An installation structure on the inner side of the left lower beam (side skirt) of the vehicle body, used to fix the lower shielding plate and enhance the rigidity of the vehicle body.
If you are performing maintenance or replacing parts, it is recommended to first confirm the specific vehicle model and part number. The shapes and installation holes of the brackets for different vehicle models can vary greatly, and it is best to refer to the original vehicle parts or repair manuals.
If you want to know the corresponding part for a specific vehicle model, you can provide the model and year. I can help you further confirm it.
The main function of the left shielding lower part installation support is to fix and support the shielding/protective components in this area, while protecting the chassis lines, guiding airflow, and reducing vibrations. The "support" usually refers to the installation bracket or support point of the left chassis shielding plate or shielding panel. Its functions can be broken down into several points:
Fixation and bearing capacity: The support structure firmly fixes the left shielding plate to the bottom of the vehicle body, preventing loosening, resonance, or detachment during driving. It is also one of the force-bearing points when using a jack to lift the vehicle.
Protection and isolation: The shielding plate itself blocks direct impact from sand, gravel, rain, and snow on the chassis components and lines. The support structure ensures its proper position, maintaining the protective effect.
Airflow and noise reduction: The flatness of the lower shielding plate affects the airflow under the chassis. The support structure keeps the shielding plate stable, helping to reduce wind resistance and wind noise, and also providing some sound insulation.
Protecting the engine's sinking path: The original design of the vehicle takes into account the engine sinking during a collision. If the support and shielding plate materials are not modified properly (such as using hard steel plates), they may get stuck in the sinking path, increasing the risk of injury.
If you want to know the corresponding shielding support piece for a specific vehicle model, please provide the model and year so that I can check the original vehicle repair manual or part number.
"Left shielding - lower part - installation support" failure usually refers to the loosening, detachment, or damage of the installation bracket for the left front wheel liner (mudguard liner) or chassis shielding plate. It is not a core engine failure, but it needs to be addressed promptly.
This failure is often caused by the detachment of snap fasteners, bottoming out and scraping, or the fracture of the support. If only the snap fastener detaches, it can be re-fastened; if the support fractures or the shielding plate is damaged, replacement is required.
Confirm the location of the fault first.
"Left shielding - lower part" generally refers to the following two areas. It is recommended to lift the vehicle first to confirm:
Left front wheel liner: The plastic shield plate above the wheel, which blocks sand, gravel, and water. Detachment of the snap fastener will cause it to sag and hit the tire, resulting in a "tap-tap" abnormal noise at high speed or in rainy weather.
Chassis lower shielding plate: The shielding plate under the engine, which is damaged by bottoming out or scraping. The support may be damaged or the shielding plate may fall off.
Treatment plan
Snap fastener detachment (the simplest): If the liner is sagging but not damaged, replace the snap fastener with the same type. The original factory uses plastic snap fasteners with a small amount of screws for fixation. Long-term bumps can cause aging and fracture.
Loose support plate: If the screws of the shielding plate or liner support are shaken loose, lift the vehicle and tighten them; if the screws slip, replace them with screws of the same specification.
Fractured support or damaged shielding plate: If the support is fractured and cannot be repaired, a replacement part is required; if the shielding plate is severely damaged, replacement is recommended. The plastic shielding plate is not expensive, and the replacement of the engine lower shielding plate costs approximately 200-300 yuan.
Inner liner damage: The inner liner of the front wheel has cracked, allowing dirt and sand to easily enter the cabin. It is recommended to replace it promptly. Replacing the inner liner requires removing the tire, cleaning the dirt and sand, and then installing the new part.
Attention
If there is a distinct abnormal noise from the chassis during driving, avoid driving at high speed and making sharp turns. Have it inspected and repaired as soon as possible to prevent the guard plate from falling off and affecting safety.
If it is caused by an accident or collision, check if there are any accompanying damages to the suspension and steering knuckle, etc. Simply replacing the guard plate is not enough.
If you are unsure about your ability to handle the situation, it is recommended to go to a repair shop or 4S store. Elevating and inspecting is the most reliable method.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products