• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-530167370_Left-front-wheel-housing-upper-beam-outer-panel zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:530167370

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-Left-front-wheel-housing-upper-beam-outer-panel
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 530167370
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-530167370_Left-front-wheel-housing-upper-beam-outer-panel
HAD-530167370_Left front wheel housing upper beam outer panel

Product knowledge

 

What is the outer plate of the beam on the left front wheel housing of the car?

"The outer plate of the left front wheel housing" is not a standard term. The closest component is the left front fender (also known as the leaf panel), which is the entire arc-shaped outer panel of the vehicle body above the left front wheel.

The "outer beam of the wheel housing" you mentioned might be a mixed term for several components. When viewed by position:
- Fender (Leaf Panel): The protruding outer panel of the vehicle body above the left front wheel. This is the most suitable description for "outer beam of the wheel housing". Its function is to prevent mud and water from splashing onto the vehicle body and to protect the body from being damaged by sand and stones. It also belongs to the exterior covering component.
- Wheel well liner: The semi-circular decorative strip protruding from the top of the fender over the tire. Common materials include ABS plastic, stainless steel, and rubber. It mainly protects the wheel edge and serves a decorative purpose.
- Front wheel fairing plate: The structural plate on the inner side of the front wheel, preventing mud and sand from splashing onto other parts of the vehicle body and protecting the wheel from external damage.
- Front wheel fairing upper beam: It is a component of the vehicle structure, connecting the front longitudinal beam and the lower plate of the A-pillar, supporting the front wheel fairing plate and the engine cover plate, and enhancing the overall strength.

The most confusing part is that the fender is a covering component, mainly serving protection and aesthetics, not a "four beams and six pillars" structural component that ensures safety; the actual load-bearing components are the front longitudinal beam, A-pillar, etc., which are formed by hot-formed steel structures.

If you are looking at a repair list or parts list, it is recommended to directly confirm the specific model and part number. Different models may have different names.

The outer plate of the left front wheel housing of the vehicle usually refers to the left front fender (also called the leaf panel), which is located above the left front wheel and is the outer plate of the vehicle body covering the wheel on the side.

Core functions:
- Protecting the vehicle body: Preventing sand and mud splashed by the wheel from splashing onto the vehicle body and chassis, avoiding paint damage from stones and rusting of metal parts.
- Protecting the wheel and wheel arch: Covering and protecting the front wheel and its internal components, reducing the impact and wear of external splashing objects on the wheel.
- Reducing wind resistance and noise: Optimizing air flow through aerodynamic design to reduce driving wind resistance and improve stability, while blocking some tire noise.
- Ensuring steering and bounce space: The front fender design needs to reserve the limit space for the front wheel steering and up and down bouncing to ensure no interference with the wheel rotation.

The left front fender is an exterior covering component and is not the same as the "front longitudinal beam" or "front axle" that bear the load. The front longitudinal beam is the core load-bearing component of the vehicle frame, responsible for collision energy absorption; the front axle is the chassis component that installs the wheels and steering.

If you are asking about the plastic inner liner (inner liner plate/wheel arch interior plate) inside the wheel arch, its function is mainly to isolate mud, reduce wind resistance, and lower the noise of the chassis. If damaged, mud is likely to enter the engine compartment, the noise increases, and fuel consumption may rise.

The term "outer beam of the left front wheel housing" is not a standard automotive term. According to common names, it should refer to the fender (leaf panel) above the left front wheel or the internal front fender reinforcement plate/beam area. Different component failures require different handling methods, and the position should be identified first.

First, confirm which component it is
- Exterior sheet metal component (fender): The exposed outer panel of the vehicle body above the wheel, mainly preventing mud and sand splashing. Common problems include dents, scratches, wrinkles or warping, which generally do not affect driving safety, but mainly affect the appearance.
- Internal structural component (front fender reinforcement plate/beam): The load-bearing framework on the inner side of the fender, belonging to the vehicle structure component. If deformed, cracked or rusted, it may affect the strength of the vehicle body and the four-wheel alignment, and needs to be paid attention to.
- Suspension/Chassis components: If accompanied by abnormal noise, deviation or uneven tire wear, it may be problems with the lower arm, shock absorber, ball joint or bearing, and is not related to "outer beam of the wheel housing".

Corresponding handling methods
- Exterior fender appearance damage: Minor dents can be repaired by "dented without paint", which is quick and cheap; severe wrinkles or peeling paint require "sheet metal + paint". Front fenders are often independently assembled, and when the damage is severe, they can be replaced as a whole, with relatively controllable costs.
‌Deformation of the inner reinforcement plate or crossbeam: It needs to be stretched and reset using a beam alignment instrument in a professional sheet metal workshop, and then welded or replaced according to standards. After the repair, a four-wheel alignment must be redone; otherwise, it is prone to veering and wearing out the tires.
‌With abnormal noises or veering: First, check if there are any foreign objects in the tires or if they are unevenly worn. Then, check the brake pads, wheel hub bearings, lower arm bushings and ball joints. It is recommended to have a technician inspect the vehicle after lifting it up. Do not blindly replace parts.‌
If this area has experienced a collision, or if you feel that the direction is veering or the tires are abnormally worn, it is recommended to go to a 4S store or professional repair shop for a body size inspection + four-wheel alignment as soon as possible to confirm if the internal structural components are damaged, as this directly affects driving safety.‌

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products