• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-3412020_Universal-Joint-Dust-Cover-Assembly-II_S00000 zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:3412020

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-Universal-Joint-Dust-Cover-Assembly-II_S00000
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 3412020
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-3412020_Universal-Joint-Dust-Cover-Assembly-II_S00000
HAD-3412020_Universal Joint Dust Cover Assembly II_S00000

Product knowledge

 

What is the dust cover assembly for the universal joint of a car?

The automotive universal joint dust cover assembly is a component assembly that wraps around the outside of the universal joint and serves as a seal and protection. Its core function is to prevent dust, mud, and water vapor from entering the internal part of the universal joint, while locking the lubricating grease from leaking. Once damaged, it is prone to causing abnormal noises, wear, and even failure of the half shaft.
Structure composition
Dust cover body: mostly in the form of wave-shaped elastic rubber or TPEE material shells, which can stretch and deform when the universal joint rotates, while maintaining sealing.
Installation part and braid ring: The dust cover is sleeved at one end of the ball cage bell-shaped shell opening end and is fastened by a stainless steel clamp (braid ring) to prevent detachment.
Protective sleeve: Some components are additionally equipped with protective sleeves outside the braid ring, covering the installation part and the maximum wave peak section, reducing the risk of damage.
Key functions
Sealing protection: Isolate mud, water vapor, and dust from entering the precise ball cage interior.
Lubrication retention: Prevent internal lubricating grease from leaking, ensuring the normal operation of the universal joint.
Buffer and pressure reduction: The wave-like structure combined with the buffer cavity uses gas flow to buffer the high-frequency deformation pressure.
Maintenance reminder
The aging and cracking of the dust cover often begins with minor wrinkles or small cracks, and regular inspections are required.
After damage, there will be abnormal noises during steering, loss of lubricating grease, and dust entering will accelerate the wear of the universal joint and even cause the half shaft to fail. It is necessary to replace it in time.
When installing, pay attention to the tightening torque of the clamp (usually 5N·m to 8N·m), and check for any distortion, folding, or excessive stretching.
The core function of the automotive universal joint dust cover assembly is to provide sealing and protection for the transmission shaft universal joint. On the one hand, it prevents external dust and mud from entering, and on the other hand, it prevents the internal lubricating grease from leaking, thereby ensuring the normal operation of the universal joint and extending its service life.
Specific functions
Dust and dirt prevention: Block dirt, dust, and other impurities from entering the internal part of the universal joint, avoiding contamination of the raceway and balls.
Sealing lubricating grease: Prevent the leakage of lubricating grease, ensuring the ball cage is always lubricated well, reducing wear.
Waterproof and corrosion prevention: Block rainwater and water vapor, preventing internal parts from rusting or oil emulsification.
Adapting to deformation: The universal joint constantly rotates during steering , the dust cover needs to be flexible and durable, able to adapt to frequent deformation without cracking.
Consequences of damage
Once the dust cover is damaged, dust and water enter, lubricating grease leaks, causing the ball cage to wear, abnormal noises (especially during steering), and in severe cases, even failure of the half shaft, affecting driving safety.
Material and design
Traditional materials are mostly rubber, and now TPEE or TPE is also used, which has better aging resistance, low-temperature resistance, and fatigue resistance.
Some new designs adopt a wave-like structure, with grooves on the wave peak surface, reducing the contact area and facilitating drainage, reducing abnormal noises, and suitable for the noise reduction requirements of new energy vehicles.
Dust cover damage: The most typical manifestation is that the chassis makes a "click-click-click" or "cough-cough-cough" metal knocking sound when steering, and there may also be oil leakage or oil seepage from the dust cover. This is a very common but easily overlooked problem in the transmission system, and if detected late, the repair cost will double.
Fault cause and consequences
The function of the dust cover is to seal the ball cage, prevent mud from entering, and lock the lubricating grease. Once damaged, the lubricating grease runs out, mud enters, and the steel balls and tracks dry grind, causing rapid wear. Initially, only the steering is noisy, later straight driving also buzzes, and finally the ball cage breaks and the half shaft comes out, causing the vehicle to stall directly.
How to determine if this is the problem
Look: Open the engine hood and check if the black rubber sleeve near the wheel end of the half shaft has cracks, oil leakage or oil stains spilling out.
Listen: Steer the vehicle in place and start, listen for any "click-click" abnormal noise; the sound changes with the rotational speed of the wheel, the more obvious the noise, the heavier the wear.
Handling suggestions
Early detection and early treatment: When the dust cover is damaged but the ball cage is not worn, just replace the dust cover and add lubricating grease. It's cost-effective. Don't wait until obvious abnormal sounds occur before repairing.
Four-wheel alignment: If only the ball cage is replaced without disassembling the suspension rods, no alignment is needed; if the tie rod or steering knuckle is disassembled, it is recommended to do an alignment once.
Lubricating grease: When replacing, use special high-temperature-resistant blue-black lubricating grease; do not use ordinary lubricating grease.
Risk Warning
When the dust cover is damaged, the sand and dirt that enter the ball cage will accelerate the wear and tear. In severe cases, the steel balls may fall out and damage the gearbox and differential. The repair cost will double. If the abnormal noise when turning is already obvious, it is recommended to check it as soon as possible. Don't take the attitude of "let's see how it goes for a while".

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products