• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-3401010-E1-Mechanical-Steering-Gear-with-Tie-Rod-Assembly zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:3401010

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-Mechanical-Steering-Gear-with-Tie-Rod-Assembly
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 3401010-E1
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-3401010-E1_-Mechanical-Steering-Gear-with-Tie-Rod-Assembly
HAD-3401010-E1_ Mechanical Steering Gear with Tie Rod Assembly

Product knowledge

 

What is the car mechanical steering gear with tie rod assembly?

The automotive mechanical steering gear with tie rod assembly is simply put, is the transmission system within the rack and pinion steering mechanism that converts the rotational motion of the steering wheel into the steering action of the wheels. It is composed of two main parts: the steering gear and the steering rack that mesh with each other, and then connected to the wheels through the steering tie rod.

Its working principle:
Gear-rack conversion: When you turn the steering wheel, the steering column drives the small gear to rotate, and the gear meshes with the rack, converting the rotational motion into the left-right linear motion of the rack.
Tie rod transmission: The two ends of the rack are connected to the steering tie rod (inner tie rod + outer tie rod), and as the rack moves, the tie rod pushes and pulls the steering knuckle, causing the wheels to deviate and the vehicle to turn.
There are two types of tie rods: the straight tie rod is responsible for transmitting the force from the steering rocker arm to the steering knuckle arm, and the cross tie rod connects the left and right trapezoidal arms to ensure that both wheels turn synchronously and can adjust the front toe.

Component composition:
Steering gear: The driving gear that meshes with the rack, serving as the starting point of the transmission.
Steering rack: The metal strip with teeth, converting the rotational motion into linear motion.
Steering tie rod: It consists of the inner tie rod and the outer tie rod (outer ball joint), connected by a ball joint in the middle, allowing the wheels to bounce up and down without damaging the steering mechanism.
Ball joint pin: Like a joint, it allows the tie rod to flexibly transfer force during the wheel's bouncing motion.
Maintenance reminder:
This component is a critical safety component. If the tie rod breaks or the ball joint falls off, it will cause the steering to lose control instantly. Daily attention: If the axial clearance of the ball joint pin exceeds 0.5mm, it should be dealt with. Regularly check if the dust cover is damaged, and replenish lubricating grease every 10,000 kilometers.

The core function of this component is to convert the rotational motion of the steering wheel into the left-right deviation of the wheels, while ensuring that the two front wheels are synchronized and allowing for fine adjustment of the front toe.

Detailed breakdown of the specific functions:
Motion conversion: The small gear at the end of the steering column meshes with the rack, and as the steering wheel rotates, the gear pushes the rack to move left and right, converting the rotational motion into linear motion.
Force transmission: The rack drives the steering tie rod, which then pushes and pulls the steering knuckle arm, ultimately causing the wheels to deviate and achieving steering.
Wheel synchronization: The cross tie rod connects the left and right steering arms to ensure that both wheels deviate synchronously and avoid "fighting" during steering.
Front toe adjustment: The tie rod ends have adjustable threads, turning half a turn can adjust approximately 3mm of the front toe value, helping to reduce tire wear.

Structural design details:
It consists of three sections + ball joint: The tie rod is not a single piece but an inner tie rod plus left and right outer tie rods, connected by a ball joint in the middle. During the wheel's bouncing motion, the ball joint allows for angle changes, preventing the steering mechanism from being damaged.
Material requirements: The straight tie rod needs to withstand both tension and pressure, and is usually made of special steel such as 35CrMo, with higher strength than ordinary steel.

Usage note:
Ball joint clearance: If the clearance of the ball joint pin exceeds 0.5mm, it should be noted. Otherwise, it could cause minor issues such as abnormal steering noise or severe cases like steering loss of control.
Parking correction: When the steering wheel is not aligned, the tie rod and rack are under constant stress, accelerating the aging of the ball joint and the rack sleeve, and affecting the control accuracy.

Faults of the mechanical steering gear's gears, racks, and tie rod assembly are typically manifested as abnormal steering noise, steering deviation, steering shake, or heavy steering. Such faults usually involve abnormal meshing clearance of the steering gear-rack, worn and loose tie rod ball joint, or deformed tie rod, and need to be investigated in the order of "from outside to inside, from simple to complex".
Common fault symptoms:
Steering noise: A "clunking" or "clicking" metallic sound is heard when turning the steering wheel at high speed, often related to excessive clearance of the tie rod ball joint or wear and damage of the gears and racks in the steering mechanism.
Steering deviation: The vehicle automatically leans to one side when driving in a straight line. After excluding tire pressure issues, it may be due to bent tie rod, loose ball joint, or uneven wear of the gears and racks.
Steering wheel shaking: During medium to high-speed driving, the steering wheel shakes and even the hands feel numb. This may be due to worn steering tie rod ball joints or incorrect front wheel alignment.
Steering that is heavy or stuck: Turning the steering wheel is difficult. This could be caused by worn gear-rack teeth, poor lubrication, lack of oil in the steering tie rod ball joint, or a bent steering tie rod.
Troubleshooting steps
First, check tire pressure and tires: Confirm that the air pressure and wear of the front wheels on both sides are consistent. Examine for external factors.
Check the steering tie rod ball joint: Hold the steering tie rod ball joint with your hand and shake it up and down, left and right. If there is a sense of looseness, it indicates severe wear of the ball joint and replacement is necessary.
Check if the steering tie rod is bent: Observe the steering tie rod with your eyes for any bending or deformation. Bending will directly cause poor steering sensitivity or even failure.
Check the steering gear inside: If the tie rod and ball joint are normal, check if the meshing clearance of the gear-rack teeth is too large, if there is pitting or scratching on the tooth surface, and this usually requires lifting the lift or disassembly for inspection.
Maintenance suggestions
Ball joint wear or tie rod deformation: Replace the ball joint or tie rod assembly. After replacement, four-wheel alignment must be performed; otherwise, it will affect the front camber and driving stability.
Internal gears and racks of the steering gear wear: Minor wear can be adjusted by adjusting the meshing clearance; if the tooth surface is severely pitted or scratched, consider replacing the steering gear assembly.
Dust cover damage: Damage to the ball joint dust cover of the steering pull rod will cause lubricating oil leakage and sand intrusion. It is necessary to replace it in time and replenish lubricating oil.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products