What is the front impact buffer of a car?
The components that reduce impact at the front of a car, usually referring to the front bumper and the internal buffer blocks (also called buffer rubber blocks), jointly take responsibility for absorbing and moderating the impact force during a collision.
Front bumper: The plastic shell at the very front of the car body, its main function is to absorb and moderate the impact force from minor collisions, protecting the car body and reducing the harm to pedestrians.
Buffer block (buffer rubber block): The rubber or polyurethane elastomer installed between the bumper inner side and the vehicle's longitudinal beam. During a collision, it first crushes and deforms, absorbing energy and preventing the impact from directly reaching the metal structure of the car body.
Core characteristics of the buffer block
Material: Mostly high-rebound polyurethane or rubber, resistant to aging and oil, and able to maintain elasticity under high temperatures or sunlight exposure.
Structure: Usually made in a honeycomb or multi-layer structure, it crushes layer by layer during a collision, absorbing energy in a graded manner, and adapting to different collision speeds.
Location: Commonly found on the inner side of the front bumper, the edges of the doors, near the engine hood latch, and at the connection points of the chassis sub-frame, etc.
When to check
During daily driving, if you find that the buffer block is very hard when pressed down, does not spring back, or has cracks or powdering on the surface, it indicates that it has aged and needs to be replaced. The replacement cost is low, and it can effectively protect the shock absorber and the car body structure, avoiding abnormal sounds and hard impact damage.
The core function of the front part's impact reduction blocks (usually referring to the energy absorption blocks inside the front bumper) is to absorb and buffer the impact energy during a collision, protecting pedestrians and passengers inside the car, and reducing vehicle damage and maintenance costs.
Specific functions
Absorbing collision energy: Using its own plastic deformation to dissipate the impact force. In low-speed collisions of 5-15 km/h, the energy absorption block can absorb 80%-95% of the impact energy, reducing the damage to the vehicle's longitudinal beam.
Protecting pedestrian safety: Using multi-density foaming materials (such as honeycomb polyethylene), it can effectively reduce the impact force on pedestrians' lower legs during a collision, reducing the risk of fractures, and meeting pedestrian protection regulations.
Reducing maintenance costs: By deforming itself to absorb energy, it protects the more expensive components behind it (such as the impact bar, headlights, etc.). There are cases showing that for vehicles with energy absorption blocks, after minor scratches, the cost of repairing the front bumper can be reduced by more than 30%.
Collaborative protection with impact bars: The energy absorption block and the energy absorption box, as well as the impact bar, form a three-level protection system. In low-speed collisions, the energy absorption block and the energy absorption box take effect; in high-speed collisions, the main protection role is taken by the high-strength impact bar and the vehicle's longitudinal beam.
Components that are easily confused
There are several similar-named components in the front of the car, with different functions:
Shock absorber buffer block: Located in the suspension system, its function is to prevent the shock absorber from being compressed to the bottom, protecting the shock absorber from oil leakage and extending its lifespan, mainly affecting driving comfort.
Plastic shell of the bumper (plastic cover): The outermost plastic part, its main function is to moderate the impact force from minor collisions, protect pedestrians, and has a low replacement cost when damaged.
Cover plate of the headlight cleaning device: Sometimes small squares can be seen on the front bumper, which is the cover plate of the headlight cleaning nozzle, not the energy absorption block.
Energy absorption block is a component that "sacrifices itself to protect others". If it deforms or cracks after a collision, it is recommended to replace it in time, otherwise, it will affect the subsequent buffering protection effect.
The front part's impact reduction blocks usually refer to the buffer layer inside the front bumper or the front shock absorber buffer block. When they fail, they mainly cause abnormal sounds, buffering failure, and a decline in handling stability. The specific manifestations depend on which part is damaged and need to be distinguished first.
Two common types of "buffer blocks"
Front bumper buffer layer (collision energy absorption block): Located between the outer panel of the front bumper and the metal crossbeam, mostly foam or honeycomb-shaped high-molecular materials, used to absorb impact energy during low-speed collisions, protecting the car body and reducing the harm to pedestrians. If damaged, the protective capability decreases during low-speed collisions, and the repair cost may be higher.
Front shock absorber buffer block (suspension buffer block): Installed at the upper end of the shock absorber, its main function is to buffer the shock absorption and spring pressure, preventing the shock absorber from being compressed to the maximum extent directly. This component is most prone to aging or fracture, and it is also a common source of chassis abnormal noises.
Typical symptoms of shock absorber buffer block damage
Abnormal noise: When passing over bumpy roads, speed bumps, or potholes, there is a "clicking", "thumping", or metal collision sound in the front part.
Increased body vibration: When passing over potholes, the front part vibrates significantly, and the jarring sensation is directly transmitted to the interior of the vehicle.
Poor handling: The steering sensitivity decreases, the vehicle wobbles at high speeds, the front tilt is more obvious when braking, and the braking distance may increase.
Abnormal tire wear: Uneven force causes uneven wear, and if not dealt with for a long time, it may cause deviation.
Associated damage: If not replaced for a long time, the impact directly passes to the shock absorber, which may lead to oil seal leakage, shortened shock absorber lifespan, and even suspension deformation.
Handling suggestions
Locate first and then replace: The abnormal noise may not all be caused by the shock absorber block. It could also be due to the top rubber, balance rod rubber sleeve, lower arm ball joint, etc. It is recommended to first record the road conditions when the abnormal noise occurs and go to a repair shop or 4S store that can provide road test and chassis inspection to confirm the source.
Replace promptly: The shock absorber block is an easily damaged rubber part. If it ages or breaks, it is recommended to replace it directly. The repair cost is not high, and if it is left for too long, it may affect the shock absorber as well.
Check for oil leakage: Use a flashlight to look at the inside of the wheel arch to see if there is any oil on the outside of the shock absorber. If there is, it indicates that the shock absorber itself may be damaged and needs to be dealt with together.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.