• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-8402942_2-Front-Cabin-Cover-Support-Rod-Card_S00000 zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:8402942

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-2-Front-Cabin-Cover-Support-Rod-Card-S00000
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 8402942
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-8402942_2-Front-Cabin-Cover-Support-Rod-Card_S00000
HAD-8402942_2 Front Cabin Cover Support Rod Card_S00000

Product knowledge

 

What is the car front hood support rod clip?

The front compartment support rod clip is a small clip or fastener used to fix the engine hood support rod and prevent it from accidentally falling off. It is usually installed on the front side of the engine hood or at the edge of the engine compartment. The material is mostly high-strength engineering plastic or reinforced nylon.
Main function
Fixed support rod: When the support rod is retracted, it is inserted into the slot to prevent shaking, abnormal noise or falling during driving.
Safety protection: After raising the hood, the snap catches the end of the support rod to prevent accidental detachment, which could cause the hood to suddenly drop and injure hands or damage cabin components.
Limitation and vibration prevention: Through elastic interlocking and self-locking structures, the support rod remains stable during bumpy roads, strong winds, etc.
Q&A
‌Aging and Fracture‌: Plastic fasteners tend to become brittle and crack under long-term exposure to sunlight and high temperatures, causing the support rods to fail to grip properly and requiring immediate replacement.
‌Risk of Sheet Metal Deformation‌: Each time the cover is opened, apply firm pressure to secure it tightly. Long-term fixed-point compression may cause the thin sheet metal at the front end of the engine cover to bulge, resulting in uneven gaps and improper closure. During routine static checks, simply gently press the support rod against the slot and do not need to keep it firmly pressed all the time.
‌Simple Replacement‌: Fasteners for most models can be removed and installed by hand without tools, and the cost of compatible replacement parts is not high.
‌If you notice that the hood opens and closes with difficulty, the support rod is not securely engaged, or the gap of the hood becomes misaligned, it is likely that the fastener has aged or become loose. First, check this small part. Usually, replacing it once can solve the problem.
‌The main function of the support rod fastener on the front hood is to fix the support rod and prevent it from accidentally slipping or shaking, ensuring that the hood is stably supported when open, and avoiding sudden drop and causing danger. Although it does not directly bear weight, it performs the functions of precise positioning, preventing abnormal noise, and resisting vibration displacement.
‌Specific Functions
‌Fixing the Support Rod‌: The fastener firmly clamps the end or body of the support rod, preventing it from moving, especially when the vehicle is moving, being towed, or in windy weather when opening the hood, to prevent the support rod from slipping and injuring the components in the engine compartment or causing hand injuries.
‌Improving Stability‌: Through the dual fixation structure of "support rod socket + opening-type pipe clamp", the stability of the support rod when supporting the hood is significantly improved, avoiding the hood floating and shaking.
‌Protecting Sheet Metal and Preventing Abnormal Noise‌: The elastic deformation bite and axial self-locking structure of the fastener can buffer vibrations, prevent the hood from making a "clunking" noise, and avoid the support rod directly pressing against the thin sheet metal, causing deformation.
Cautionary Notes
Daily static opening of the hood (such as checking the oil, adding windshield washer fluid), just align the support rod with the slot and gently press it in. There is no need to always forcefully tighten it. Frequent and prolonged tightening of the hood will cause the thin sheet metal at the front end of the hood to bear concentrated stress, which over time leads to plastic deformation, resulting in uneven gaps and poor closure.
Special scenarios require tightening: When the vehicle needs to be moved, towed, or when opening the hood in windy weather, be sure to tighten the snap fasteners to prevent the support rod from slipping.
Aging and replacement: The snap fasteners are plastic parts. Long-term exposure to the sun and repeated insertion and removal can cause them to age and become brittle. If they become loose, break, or fail to engage, they should be replaced directly. Otherwise, the support rod may suddenly come out, posing a risk of the hood falling off.
The most common cause of the front hood support rod snap fastener failure is aging, cracking, or detachment of the plastic snap fastener, causing the support rod to fail to fix properly, resulting in abnormal sounds when opening and closing the hood, or sudden rebounding during driving.
First, determine which problem it is
Snap fastener breakage/loosening: The end of the support rod has no place to attach, and the hood cannot be fixed properly after opening. There is knocking noise inside the engine compartment when driving on rough roads.
Support rod deflation: The support rod cannot hold the hood and automatically drops after opening. This is usually due to aging of the sealing ring or internal damage, rather than a problem with the snap fastener.
Snap fastener loosening: The snap fastener is still there but has lost elasticity. The hood does not open or close smoothly, and is not securely fixed.
Method for replacing the snap fastener
Tools needed: A flat-head screwdriver or a small pry bar. If necessary, prepare a pair of needle-nose pliers. The replacement snap fasteners purchased online usually come with disassembly tools, but the strength may not be sufficient. They can be used with a small pry bar.
Remove the old snap fastener: Insert the tool into the gap of the snap fastener base and pry it out. Be careful not to believe in the "more force equals better result", as the base of the snap fastener is fixed to the hood through a groove, and excessive force can easily cause the sheet metal to deform.
Install the new snap fastener: The snap fastener is tilted, the groove is aligned with the hole in the hood, and gently push it in place, ensuring a tight fit without any shaking.
Test: Open and close the hood several times to confirm that the support rod can firmly hold it, without looseness or abnormal sounds.
The snap fastener is a plastic part. When replacing it, first confirm that the model is compatible. For older Toyota Wiyas, Coras, Corollas, Honda Civics, CR-Vs, Volkswagen Speedtrons, etc., snap fastener aging is relatively common. They can be replaced individually without replacing the entire support rod.
Safety Alert
If the latch breaks and cannot be replaced temporarily, you can temporarily secure it with wire or rope to solve the abnormal noise. However, it will be inconvenient to open the cover each time. Replace it as soon as possible.
If it is confirmed that the hydraulic support rod itself is leaking pressure or damaged, it is not recommended to disassemble and repair it yourself. The internal part of the hydraulic rod contains high-pressure liquid and gas, and disassembling poses safety risks. It is recommended to replace it at a repair shop or 4S store.
When replacing, if you find that the engine hood latch is also stuck or damaged, check it together to avoid situations where the hood cannot be closed or opened.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products