The front license plate of the car - the function of the mounting plate
The mounting plate for the front license plate (also known as the license plate holder or license plate bracket) mainly serves the functions of fixing the license plate, protecting the vehicle body, and preventing theft. At the same time, it can also make the front end of the vehicle look cleaner and more aesthetically pleasing.
Specifically:
- Fixing the license plate: It is the base for installing the license plate, allowing the plate to be firmly attached to the vehicle body to prevent loosening, shaking, or falling off during driving.
- Protecting the vehicle body: It can prevent the edges of the license plate from scratching the car paint, especially in cases of minor collisions, and can also distribute the force to reduce the risk of bumper displacement or cracking.
- Sealing and dust-proofing: Some original factory-designed mounting plates can seal the gap between the front bumper and the vehicle body, preventing dust and rain from entering the engine compartment and protecting the internal wiring and structure.
- Anti-theft: When used in conjunction with an anti-theft locking device, it can reduce the possibility of the license plate being stolen.
- Aesthetically pleasing: It allows the license plate and the front end to blend more naturally, making the overall appearance more harmonious.
When installing, pay attention: The mounting plate should not cover the license plate characters. The inner edge should be more than 5mm away from the edge of the characters. It is necessary to use a dedicated locking device with the license plate factory code, and not use detachable or flipable brackets, otherwise, you will be fined.
There are several solutions for fixing the mounting plate:
- If the damage is only slight deformation or crack: If the mounting plate is not completely broken, but only slightly deformed, you can try to repair it yourself. For example, place a flat wooden board behind the license plate and gently hit it with an rubber hammer to restore its shape.
- If the screw holes are damaged but the plate body is intact: If only the screw holes are loose or cracked, you can try to use a metal filler or a special repair tool to fill and then drill a new hole, or directly use self-tapping screws to fix the license plate on the bumper.
- If the mounting plate is completely broken or shattered: The most direct solution is to replace the new license plate mounting plate.
A faulty front license plate mounting plate is indeed a headache, but don't worry. This problem is not complicated to handle, and the key lies in the extent of the damage and your manual skills. I have outlined several solutions for you, and you can choose based on your situation:
- First, determine the extent of the damage:
- If only slightly deformed or cracked: If the mounting plate is not completely broken, you can try to repair it yourself. For example, place a flat wooden board behind the license plate and gently hit it with an rubber hammer to restore its shape.
- If the screw holes are damaged but the plate body is intact: If only the screw holes are loose or cracked, you can try to use a metal filler or a special repair tool to fill and then drill a new hole, or directly use self-tapping screws to fix the license plate on the bumper.
- If the mounting plate is completely broken or shattered: The most direct solution is to replace the new license plate mounting plate.
Faulty front license plate mounting plate: First, determine the extent of the damage:
- If it is only slightly deformed or cracked: You can fix or replace the bracket yourself, or repair the fixing points or screw holes if they are severely damaged, and go to the vehicle management office or 4S store for handling if the damage is severe.
No matter how you repair it, don't use tape or iron wire to cover the license plate number, otherwise, you will be treated as if you have covered the license plate.
First, determine which type of fault:
- If the screws are loose or the latch is loose: Just tighten the screws directly, or buy a new latch from the auto parts store. Pay attention to using the locking screws issued by the vehicle management office instead of ordinary screws.
- If the license plate frame or mounting plate is cracked or deformed: Just buy a new one and replace it. You can choose stainless steel, with four screws on the top and bottom for a more stable fix.
- If the screw holes are damaged: Handle it in three different situations.
- Minor damage: Apply for a replacement at the vehicle management office, which is the most convenient.
- Slightly serious: Use rivets to re-fix, requiring removing the damaged area, welding new bolts, and applying anti-rust paint.
- Very serious: Re-drill the position and do not affect the installation and compliance.
- If the fixing points on the bumper are damaged: Do not attempt to fix it yourself, go to the 4S store to weld or replace the bracket.
Self-installation method:
Prepare a Phillips screwdriver, screw components (pad + screw + cap).
First, pass the screws through the license plate, and fix the anti-theft cap at the other end, aligning the holes on the base.
Do not tighten all the screws at once. First fix the license plate, then tighten them one by one, with moderate force and avoid over-tightening.
Finally, press the cap against the pad to ensure it is firmly fixed.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.
