Left rear seat cushion assembly of the car
The left rear seat cushion assembly of a vehicle typically refers to the complete seat component located on the left rear (or the second row left) of the vehicle, including the frame, cushion soft pad, outer skin, sliding rail, angle adjuster, fixation device, etc. Some models also integrate side airbags, seat belt anchor points, headrests, etc. According to the current publicly available information, the following are the key points of the information:
What is the "left rear seat cushion assembly"?
Composition structure: It includes the seat frame, cushion foam/soft pad, outer skin, sliding rail, angle adjuster, fixation clips, etc.
Function positioning: It is part of the vehicle occupant restraint system and needs to meet safety regulations during collisions to ensure structural integrity and energy absorption capabilities.
Applicable range: Commonly found in MPVs, SUVs, and three-row seat models, or the left rear position of hatchback vehicles.
Source of accessories and price reference
According to recent information from auto parts platforms, the prices of left rear seat cushion assemblies vary greatly among different brands of vehicles:
Replacement suggestions
Confirming the vehicle model year: For the same model of different years, the seat structure may be different (such as the way seat belts are integrated, airbag configuration).
Prioritize original factory or dismantled parts: Especially when it comes to safety structures (such as frames, fixation points), it is not recommended to use low-quality aftermarket parts.
Installation precautions:
Match the original vehicle interface (power supply, sensors, seat belt pre-tighteners)
Some models require seat position calibration or safety system reset
The left rear seat cushion assembly of a vehicle is usually the complete cushion structure installed on the left rear seat of the vehicle. Its main functions are in the aspects of support, safety, comfort, and protection. Based on the current authoritative public information, the specific functions are as follows:
Core functions
Provide body support: Through the ergonomic foam filling layer and frame structure, it disperses the pressure on the buttocks and thighs, reducing fatigue during long rides.
Ensure occupant safety: As part of the seat system, it works with the seat belt fixation device to help fix the occupant's position during a collision, reducing the risk of injury.
Improve riding comfort: Using soft filling materials and breathable fabrics, it reduces the jarring sensation and improves the tactile experience; some models also integrate heating and ventilation functions.
Protect the original factory seat: Preventing wear, stains, and scratches from daily use, prolonging the seat's lifespan, and facilitating cleaning and maintenance.
Structural composition (typical)
Frame: Metal or high-strength plastic frame, providing the basic load-bearing structure;
Filler layer: Foam plastic or foaming material, used for cushioning and conforming to the body curve;
Surface skin: Leather or fabric covering, balancing aesthetics and durability;
Adjustment mechanism (if applicable): Some models support front and rear sliding, angle adjustment, etc.;
Fixation and connection components: Ensuring the cushion assembly is firmly installed on the vehicle body.
Note: If referring to the "rear seat cushion three-piece set" of the left rear part, this structure usually includes the main cushion + left and right armrest pads, which can precisely fit the asymmetrical rear seats, preventing slippage and wrinkling, and improving overall comfort and protection effect.
Common fault causes of the left rear seat cushion assembly usually manifest as cushion collapse, insufficient support, abnormal noise, or inability to adjust normally. According to the current publicly available information, the following are common causes and handling suggestions:
Common fault causes
Cushion collapse: Internal filling materials (such as foam) lose elasticity due to long-term pressure, or the supporting structure (such as springs, frame) deforms.
Adjustment mechanism failure: Sliding rails, clips, control rods, etc. are worn, rusted, or damaged, causing the seat to be unable to be fixed or adjusted.
Fabric damage: Fabric or leather is worn, torn, affecting appearance and comfort. Circuit or motor failure (for electric seats only): Motor damage, circuit breakage, or fuse melting, resulting in the failure of electric adjustment.
Recommended troubleshooting steps
Preliminary fault type determination
Observe if there is obvious sinking, abnormal noise, sticking, or complete inability to adjust.
Check for obvious damage on the exterior (such as fabric tear, loose screws).
Try a simple troubleshooting
For sliding rail sticking, spray rust remover and gently shake the seat.
Check if the locking button has been mistakenly touched, try unlocking before adjusting.
If it is an electric seat, check the fuse and power connection.
Evaluate if professional repair is needed
If the sinking is severe, the frame is deformed, the motor does not work, or the latch is broken, do not attempt to disassemble it yourself. Contact a professional repair person.
Seat cushion sinking: Usually requires replacing the entire seat assembly. 4S stores generally use original factory parts.
Fabric repair: For mild wear, use repair agent. For severe damage, replace the fabric or install a seat cover.
Tips: Rear seats involve safety fixation. If there is "sticking" or loosening, do not use it forcibly. Timely repair by a professional technician to avoid driving risks.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.
