What is the car rear door sealing plug?
The rear door sealing plug is usually a rubber sealing component installed at the edge of the rear door or at the position of the door frame. Its core functions are to seal, dampen vibrations, prevent dust, prevent water ingress, and provide sound insulation. According to public information, these components on the rear door of a car typically have the following common forms and functions:
Main types and functions
Door buffer rubber block (or buffer rubber plug)
Installation position: mostly located at the lower part of the rear door or near the hinge. Function:
Buffering and shock absorption: Absorbs impact force when closing the door, avoiding direct metal collision, and reducing abnormal noise and deformation.
Longer service life: Can reduce the wear rate of the door lock mechanism, hinges, and sheet metal by approximately 30%.
Door hole plug / Dust plug
Installation location: The processing hole or drainage hole on the rear door. Function:
Dust and moisture protection: Prevent dust, sand, and rain from entering the internal cavity of the car door, protecting wiring, lifting motors and other electronic components.
Door sealing strip (including door frame rubber strip)
Although not a "plug", it is often mistakenly called a sealing plug. In fact, it is a rubber strip that surrounds the rear door. Function:
Multiple sealing: Utilizing materials such as EPDM, it achieves waterproofing (IPX6) and dustproofing (IP6X).
Noise reduction and sound insulation: Effectively blocks wind noise and road noise, and the measured result shows that after installation, it can reduce noise by 5-10 decibels.
Buffering the closing process: Improves the closing feel and reduces the "clanging" sound.
Daily maintenance suggestions:
Regular cleaning: Wipe the surface of the rubber plug with a damp cloth to remove dirt and hard particles.
Timely replacement: If cracks, deformation, or detachment are found, replace it as soon as possible to avoid affecting the sealing performance.
Avoid pulling it out by accident: Do not pull it out out of curiosity or by mistake, as it may easily lead to water seepage and abnormal sounds.
Purchase and replacement reference:
You can search for "door buffer rubber block" or "rear door sealing plug" on platforms such as Taobao and Tmall. Pay attention to matching the vehicle model's hole diameter (such as 32mm).
Summary: Although the rear door sealing plug is small, it is an important component that ensures the sealing performance, quietness, and durability of the vehicle. During daily use, it should be paid attention to and maintained.
The car rear door sealing plug (usually referring to the black rubber plug or buffer rubber block on the door) is small in volume, but it performs two core functions in vehicle use: sealing protection and buffering and shock absorption.
Main functions
Sealing protection
Windproof and dustproof: Fill the gap between the door and the door frame to prevent dust from entering the interior of the vehicle when driving at high speed, maintaining interior cleanliness.
Waterproof and moisture-proof: Reduce the infiltration of rainwater and washing water into the internal cavity of the door, avoiding rusting of metal parts and short-circuiting of the circuit system due to moisture.
Sound insulation and noise reduction: Through close adhesion, it attenuates the transmission of external wind noise and road noise into the vehicle, improving the driving and riding quietness.
Buffering and shock absorption
Avoid metal collision: When the door closes, the rubber plug uses elasticity to absorb impact force, preventing the door from colliding directly with the vehicle body sheet metal, and reducing the "hammering" like abnormal sounds.
Protect structural components: Over time, it reduces the wear of hinges, locks, and other components, and experimental data shows that it can extend the lifespan of hinges by about 30%.
Prevent deformation: Avoid deformation of the door edges caused by repeated rigid impacts, thus maintaining long-term sealing performance and smooth opening and closing.
Daily maintenance suggestions
Regularly wipe the surface with a damp cloth to remove sand and other hard particles;
If cracks, deformation, or detachment are found, replace it promptly;
Do not pull it out at will, otherwise it will significantly reduce the sealing performance and accelerate the damage of the door;
Note: Some vehicle models may also be equipped with sealing strips (such as the Model Y, which can reduce noise by 5-10 decibels after installation), but "sealing plug" usually refers to the small rubber buffer/sealing piece installed on the door frame or door panel, which is different from the entire sealing strip.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.
