How to deal with foggy water on the car headlights
The fogging water on the car headlights needs to be dealt with according to the severity: mild water fog can be solved by natural air drying or by turning on the headlights to dry. For severe water accumulation, it is necessary to check the sealing performance and replace the components. Daily precautions include avoiding direct high-pressure water gun injection and regular maintenance of the air vent . If the problem persists, it should be sent for professional repair.
Youdaoplaceholder0 method of handling
Youdaoplaceholder0 light water mist (fog or a small amount of water droplets) .
Turn on the headlights for 10 to 30 minutes to use the heat from the bulbs to evaporate the water vapor.
Park the vehicle in a sunny and well-ventilated area, and open the hood to accelerate natural drying.
Use the cold air mode of the hair dryer (keep a distance of 15-20 centimeters) to assist in dehumidification.
Youdaoplaceholder0 severe water accumulation (a large number of water droplets or seepage) .
Check whether the lampshade, sealing rubber strip and air vent are damaged or aged.
Disassemble the headlight assembly and dry the internal moisture with an air gun or a low-temperature hair dryer.
Replace the sealing ring, lampshade or reinforce the seal. If necessary, send it to a professional repair point.
Youdaoplaceholder0 preventive measures
When washing the car, avoid having the high-pressure water gun directly hit the headlights.
Regularly clean the ventilation holes to ensure they are unobstructed.
Check the humidity inside the lamp in time after wading through water.
Place silica gel desiccants to absorb moisture (which need to be replaced regularly).
The car's headlights switch between high and low beams through a dual-filament structure and are equipped with anti-glare devices to ensure driving safety at night. It works as follows:
Structure and Function
The front headlights are composed of components such as mirrors, filaments, and light shields. The high beam filament is located at the focus of the mirror, and the light is emitted in parallel, with an illumination distance of approximately 150 meters. The filament of the low beam lamp is located above or in front of the focus. The light is reflected and then tilted downward. The illumination range is controlled within 50 meters in front of the vehicle to avoid dazzling.
Anti-glare measures
Youdaoplaceholder0 filament layout : The low beam filament is located above or in front of the focus point, reducing interference from oncoming vehicles by naturally tilting the light.
Youdaoplaceholder0 Light shield : Blocks the light below in low beam mode to prevent it from reflecting onto oncoming vehicles.
Youdaoplaceholder0 Asymmetric light shape design : By offset the filament position, a specific beam shape is formed, strictly limiting the glare area.
Working mode
Youdaoplaceholder0 High beam mode : suitable for high-speed scenarios without oncoming vehicles, it has a long light range and provides a wide field of vision.
Youdaoplaceholder0 low beam mode : used for meeting oncoming vehicles or in urban areas, the light is tilted downward to reduce interference with drivers of oncoming vehicles.
Additional functions
Some models are equipped with ambient light sensors and automatic light converters, which can monitor the external brightness and automatically switch between high and low beams.
Fog entering a car's headlights on rainy days is usually caused by temperature difference condensation or poor sealing. Light fog can be naturally evaporated by turning on the headlights. If water accumulates, the sealing performance needs to be checked.
Youdaoplaceholder0 The main cause of fog formation is
Youdaoplaceholder0 Temperature difference and humidity change : When the headlight is working, the internal temperature rises. When it encounters the external low-temperature and high-humidity air (such as rainy days), water vapor condenses on the inner wall of the lampshade into fog. This is a physical phenomenon. Usually, the fog will dissipate by itself 15 minutes after the headlights are turned on.
Youdaoplaceholder0 Breathable design : The headlights are not completely sealed. The rear cover has ventilation holes to balance the internal and external air pressure, but moisture may enter through them. It is more likely to occur in new cars or when the humidity is extremely high.
Youdaoplaceholder0 Poor sealing : If the lampshade cracks, the sealant ages or the dust cover is not tightly closed, rainwater or car wash water seeping in will cause water accumulation rather than temporary fog. Replacement or resealing is required.
Youdaoplaceholder0 solutions and preventive measures
Youdaoplaceholder0 natural evaporation : For light fog, you can turn on the headlights to dry it with heat or park in the sun to accelerate evaporation.
Youdaoplaceholder0 Check the sealing performance : If the fog persists or water accumulates, inspect the lampshade, sealing ring and vent hole. Any damaged areas need to be replaced or treated with glue.
Youdaoplaceholder0 Avoid high-pressure flushing : When washing the car, avoid the headlights and rinse directly. Check in time after wading through water.
Youdaoplaceholder0 Regular maintenance : Clean the drain holes to prevent blockage; It is recommended to regularly check the sealing condition of the headlights of old vehicles.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.
