The service life of BRAKEDISC brake discs: Everything You need to know
Among the numerous components of a car, the brake disc is undoubtedly one of the key parts that ensure driving safety. As for the question of how long BRAKEDISC brake discs can last, the answer is not fixed but is influenced by a combination of multiple factors.
Based on the reference data of driving mileage, generally speaking, the front brake discs may need to be replaced after the vehicle has traveled about 60,000 to 80,000 kilometers, while the replacement mileage for the rear brake discs is relatively longer, approximately 80,000 to 100,000 kilometers. However, this is only a rough range. The actual service life can vary greatly due to various factors.
Driving habits play a crucial role in the wear and tear of brake discs. If car owners often drive aggressively and frequently perform emergency braking operations, the wear rate of brake discs will be greatly accelerated. Under this driving style, the BRAKEDISC brake discs may need to be replaced after about 50,000 kilometers of driving. On the contrary, if the car owner drives gently, predicts the road conditions in advance and reduces unnecessary braking, the wear and tear of the brake discs will be reduced, and they may need to be replaced after driving 100,000 kilometers or even longer. For instance, when driving at a constant speed on a highway, the frequency of brake use is low, and the wear of brake discs is relatively slow. In urban traffic congestion, frequent starts and stops will cause the brake discs to continuously suffer from friction, accelerating their wear.
Road conditions are also an important factor affecting the lifespan of brake discs. In sections with many mountain roads, vehicles need to brake frequently to control their speed, and the brake discs are always in a high-intensity working state, which naturally accelerates wear and tear. Similarly, on congested sections with frequent starts and stops, the working intensity of brake discs is much higher than that on smooth roads, and their service life will also be correspondingly shortened.
The quality and material of brake pads are closely related to the wear of brake discs. If the quality of the brake pads used is poor and their coefficient of friction is unstable, they may cause excessive wear on the brake discs during braking. It is possible that before the vehicle has traveled 30,000 kilometers, the BRAKEDISC brake discs have to be replaced due to excessive wear. High-quality brake pads and brake discs can form a good frictional fit, effectively extending the service life of the brake discs.
There are various methods to determine whether the BRAKEDISC brake disc needs to be replaced. There are usually data labels on brake discs indicating the thickness of new discs and the thickness after use. According to European standards, when the wear of brake discs reaches 2 millimeters, replacement should be considered. Although there are no hard and fast regulations in China, this data can serve as an important reference. At the same time, when the total wear depth on both sides of the brake disc reaches 3 millimeters, it should also be replaced in a timely manner. Besides, listening to sounds is also a simple and effective way to make judgments. When you gently press the brake, if you hear a "scraping iron" sound or a loud noise, it is very likely a sign that there is a problem with the brake disc. At this point, the brake disc may have been damaged and scratched. Even if you replace the brake pads with new ones, abnormal noises may still occur. It is recommended to replace the brake disc. The wear condition of the brake discs should not be ignored either. If the brake discs are worn out by foreign objects into deep grooves or if there are wear deviations on the disc surface, it is also recommended to replace the brake discs.
Under normal driving conditions and with qualified brake pads, it is not difficult for a BRAKEDISC brake disc to last for more than 10 years. However, if the material of the brake pads is poor or the quality is not good, such as if the friction material is too hard, the brake discs may wear out severely before driving 30,000 kilometers.
To extend the service life of BRAKEDISC brake discs, car owners should develop good driving habits and try to avoid sudden braking and frequent braking. At the same time, regularly check the wear of the brake discs. Generally, after the vehicle has traveled more than 50,000 kilometers, a more comprehensive inspection should be carried out every 60,000 kilometers. If shallow grooves appear on the brake disc when replacing the first pair of brake pads, they can be restored to a good condition by turning the disc, but the turning thickness should not exceed 2 millimeters. However, after replacing the second or third set of brake pads, it is more cost-effective to directly replace the brake discs with new ones.
In conclusion, the service life of BRAKEDISC brake discs is influenced by multiple factors. Car owners should pay close attention to the condition of the brake discs, conduct regular inspections, and replace them in a timely manner to ensure driving safety.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.
