The function of the car ingot beam
The Yuanbao beam, also known as the subframe, refers to the support frame that supports the front and rear axles and suspensions. It is a device that connects the axles and suspensions to the "main frame" through it. After installation, it can block vibration and noise and reduce the sound of direct entry into the carriage.
The Yuanbao beam is also known as the subframe. The subframe is not a complete frame. It is merely a bracket that supports the front and rear axles and suspensions, through which the axles and suspensions are connected to the "main frame". Conventionally, it is called the "subframe". The function of the subframe is to block vibration and noise and prevent them from directly entering the vehicle compartment. Therefore, it is mostly found in luxury sedans and off-road vehicles. Some cars even install subframes on their engines.
The replacement of the subframe of a car will not directly lead to the scrapping of the vehicle , as long as the construction details are handled properly, the performance and safety performance of the vehicle will be fully restored.
The function and replacement reasons of the Yuanbao beam
The Yuanbao beam (subframe) is a key component that supports the front and rear axles and suspension, used to block vibration and noise, and connects the engine, transmission and main frame. The reasons for replacement include:
Accident damage: Deformation or fracture caused by severe collision.
Performance upgrade: Enhance the suspension system or load-bearing capacity.
Economic considerations: The replacement cost is lower than that of a scrapped vehicle.
Key details and precautions
If not handled properly, it may affect the vehicle's performance, but it will not lead to scrapping
Youdaoplaceholder0 Accessory selection : Give priority to using original factory parts. The thin material or dimensional deviation of third-party parts may affect durability.
Youdaoplaceholder0 four-wheel alignment : It must be calibrated after replacement; otherwise, it will affect handling and tire wear.
Youdaoplaceholder0 Sheet metal technology : Precise repair is required after an accident to ensure the alignment of the suspension system.
Potential impacts and suggestions
The value of a used car : after replacement, the vehicle is regarded as a "major accident car" and may depreciate.
Youdaoplaceholder0 Maintenance suggestion : Choose a professional institution and inspect the entire suspension system.
The following problems may occur after replacing the Yuanbao beam:
Unstable structure
If the position is deviated during installation or the support structure is not properly handled, it may cause abnormal shaking or deviation of the vehicle during driving, affecting the handling performance.
The connecting parts are loose.
If the connecting parts are not tightened after replacement, they will gradually loosen, causing abnormal noises from the chassis. In severe cases, it may affect driving safety.
Hidden dangers of welding quality
Welding material or technical defects may cause cracks and pores in the weld seam, and it may break after long-term use.
Insufficient anti-corrosion
New Yuanbao beams without anti-corrosion treatment are prone to rust, which weakens the strength of the metal structure.
Decline in carrying capacity
If the material or process is not good after replacement, it may cause deformation or abnormal noise of the Yuanbao beam when fully loaded.
The isolation effect weakens.
Improper installation will reduce the shock absorption and noise reduction functions of the Yuanbao beam, affecting the driving and riding comfort.
Vehicle rigidity variation
After replacement, the overall rigidity of the vehicle body may change, resulting in a decrease in driving stability.
The impact of replacing the rubber sleeve of the Yuanbao beam on the vehicle needs to be analyzed in combination with specific circumstances
Positive influence
Replacing the rubber sleeve of the Yuanbao beam with one that meets the specifications can enhance the stability, comfort and safety of vehicle driving. The new rubber sleeve can effectively block vibration and noise, enhance the connection strength of the vehicle body, disperse the impact force during a collision, and protect core components such as the engine and transmission.
Potential risk
Improper installation or the use of inferior accessories may lead to:
Youdaoplaceholder0 Abnormal handling : causes abnormal vibration, offset or uneven tire wear
Youdaoplaceholder0 Safety drop : Suspension system calibration failure increases the risk of vehicle body deformation during a collision
Youdaoplaceholder0 Value retention impact : Replacing the yuanbao beam component may be regarded as a "major accident vehicle", affecting the value of the used car
It is recommended to replace it at a 4S store or a professional maintenance institution and ensure that the quality of the parts meets the standards. If a vehicle needs to be replaced due to non-collision reasons such as bottoming out, the impact is usually minor. If the replacement is caused by a collision, there may be a problem of reduced vehicle body strength.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.
