What is a car rear bumper light
The rear bumper light of a car is a lighting device installed on the rear bumper of a vehicle, mainly used to convey vehicle status information to the rear and enhance driving safety. The rear bumper lights usually include brake lights, turn signals, reverse lights, etc., which alert vehicles and pedestrians behind through different light combinations. Youdaoplaceholder0.
Main functions
Youdaoplaceholder0 Brake warning : The red brake lights come on when the vehicle brakes, alerting the vehicles behind to slow down or keep a safe distance to avoid rear-end collisions.
Youdaoplaceholder0 Turn signal : Turn signals are used to indicate the direction in which a vehicle changes lanes or turns, ensuring that other traffic participants pay attention.
Youdaoplaceholder0 Reversing assist : The reversing light lights up when reversing, illuminating the road behind and warning pedestrians and other vehicles.
Youdaoplaceholder0 Fog warning : The rear fog lights (usually yellow) of some models can enhance the vehicle's visibility in rainy and foggy weather.
Name and Location
The rear bumper lights are usually called "rear taillights" or "rear lighting lamps", and the specific names vary depending on the model and brand.
The core function of the rear bumper lights (also known as rear taillights or side lights) of a car is to convey signals to the vehicles behind during driving, including driving intentions such as braking, turning, and reversing, to enhance road safety and prevent collisions . At the same time, they also have the functions of lighting and vehicle identification.
Main functions and roles
The rear bumper light is a collection of lamps at the rear of a vehicle, working in coordination through various types of lighting:
Youdaoplaceholder0 signal transmission function :
Brake lights: When on, they warn vehicles behind to slow down and prevent rear-end collisions.
Turn signals: Indicate the direction in which a vehicle is turning to ensure lane change safety.
Reversing lights: Illuminate the road behind and alert pedestrians when reversing.
Hazard lights: Warning other vehicles in an emergency.
Width indicator light: It shows the width of the vehicle and assists in meeting and overtaking judgments.
Youdaoplaceholder0 Lighting and warning functions :
Fog lights: Enhance visibility in rainy and foggy weather (with a visible distance of approximately 100 meters) and remind vehicles to keep a safe distance.
Although the rear bumper lights of some models are designed for decoration, they can enhance visibility through reflection.
Youdaoplaceholder0 Safety and aesthetic effects :
Enhance driving safety at night or in low visibility conditions and reduce the risk of accidents.
The unique lighting design enhances the vehicle's recognition and serves as an exterior element to improve its aesthetic appeal.
The malfunction of the rear bumper light of a car may be caused by various reasons. The following are the common causes of the malfunction and their solutions
Bulb problem
Bulb burnout or poor contact is a common cause. It is necessary to check and replace the bulb with a brand new one (note to avoid direct contact with the bulb surface when operating). The Audi Q5L case shows that poor contact of the bulb may cause the lamp to fail to light up, and it needs to be reinstalled or replace. .
Line fault
Short circuits, open circuits or aging of the lines may cause power outages. It is necessary to check the line connections or contact a professional electrician for repair.
The lampshade is damaged.
If the lampshade breaks and water enters, it may cause a short circuit or burn out the circuit. The lampshade needs to be replaced and its sealing must be ensured.
The fuse has blown
A blown fuse in the reversing light can cause a power outage. You can check and replace the fuse of the matching model inside the dashboard.
Relay/switch failure
If the flash relay malfunctions or the switch is damaged, it should be inspected and repaired by a professional technician to avoid damage caused by self-adjustment.
Abnormal mechanical structure
The metal contacts are misaligned and the assembly needs to be replaced. The blind spot of the radar system may interfere with the signal, so the radar needs to be calibrated or repaired.
It is recommended to give priority to checking easy-to-handle issues such as bulbs and circuits. Complex faults should be inspected and repaired at professional repair shops.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.
