The function and application of a car radiator
The radiator of a car is the core component of the car's cooling system. Youdaoplaceholder0 is mainly used to dissipate heat, prevent the engine from overheating, and maintain the engine at an appropriate operating temperature .
Core heat dissipation function
When the engine is running, it generates a large amount of heat. The radiator conducts the heat from the engine to the radiator fins through the circulation of coolant, and then dissipates the heat into the air with the help of the fan or the airflow during driving, keeping the engine temperature stable within the ideal range of 85℃ to 95℃.
Temperature regulation and system protection
Youdaoplaceholder0 Intelligent temperature control : In conjunction with the thermostat, it reduces the circulation of coolant during cold starts to quickly heat up and enhances heat dissipation at high temperatures, ensuring that the engine remains in an efficient working state at all times.
Youdaoplaceholder0 Pressure balance : The radiator cap is equipped with a built-in pressure valve (typically 1.0-1.5bar), which can adjust the system pressure to prevent pipe burst or negative pressure formation, and at the same time raise the boiling point of the coolant to approximately 120 ° C, avoiding high-temperature boiling.
Youdaoplaceholder0 Extend the lifespan of components : The dedicated coolant can prevent corrosion and scaling, reduce rusting inside the radiator and engine, and the filter structure of the radiator can intercept impurities, reducing the risk of pump blockage.
Collaborative and integrated design
Modern car radiators often integrate transmission oil cooling or air conditioning condensation functions, achieving system lightweighting through shared cooling fans. However, it is important to prioritize engine cooling under high-temperature loads.
Maintaining a car radiator is actually quite simple. Just remember these points and your engine will last longer:
Regularly check the coolant
Youdaoplaceholder0 Replacement cycle : For regular coolant, it should be replaced every 2 years or 40,000 kilometers; for long-lasting coolant, it can be extended to 5 years or 100,000 kilometers.
Youdaoplaceholder0 Liquid level check : When the vehicle is cold, the liquid level should be between MIN and MAX. If it is lower than MIN, replenish the coolant of the same brand in time.
Youdaoplaceholder0 Status observation : turbid or blackened coolant needs to be replaced immediately.
Clean the water tank
Youdaoplaceholder0 External cleaning : Rinse the heat sink with a low-pressure water gun to avoid high-pressure damage.
Youdaoplaceholder0 Internal cleaning : Treat with a dedicated cleaning agent every two years or 40,000 kilometers.
Use the coolant correctly
Youdaoplaceholder0 do not use tap water : tap water can form scale and corrode components.
Youdaoplaceholder0 brand unification : Mixing coolants of different brands may cause sedimentation.
Fault warning
Youdaoplaceholder0 water temperature is too high : Stop the vehicle immediately for inspection.
Youdaoplaceholder0 Signs of leakage : Crystals on the tank cap or pink liquid on the ground require immediate treatment.
Special scenarios
Youdaoplaceholder0 winter : In the north, use antifreeze at -35℃. Preheat the coolant before cold start.
Youdaoplaceholder0 After off-roading : Check if the heat sink is clogged with sand and mud.
It is recommended that the radiator of a car be cleaned every two years or 40,000 kilometers, which is a common standard for most vehicles. However, the specific frequency still needs to be flexibly adjusted according to your driving environment and habits
Basic cleaning cycle
Youdaoplaceholder0 Under normal circumstances : Cleaning every two years or 40,000 kilometers can effectively maintain the efficient operation of the cooling system.
Youdaoplaceholder0 Harsh environment : If you often drive in high-temperature, high-humidity or dusty areas, it is recommended to shorten the cleaning time to once a year or every 20,000 kilometers.
Factors for adjusting the cleaning frequency
Youdaoplaceholder0 operating environment :
Sand and dust, saline-alkali land or extreme weather can accelerate scale formation and corrosion, so the frequency of cleaning needs to be increased.
In good urban road conditions, the cleaning can be extended to once every 3 to 4 years.
Youdaoplaceholder0 coolant mass :
Poor-quality coolant is prone to scale formation and requires more frequent cleaning.
High-quality coolant can reduce impurities and extend the cleaning interval.
Youdaoplaceholder0 frequency of use :
It is recommended to clean the car twice a year (once in the first half and once in the second half).
If you use the car less frequently, once a year is sufficient.
Cleaning timing and methods
Youdaoplaceholder0 When changing antifreeze : Antifreeze is usually replaced every 2 to 4 years, and at this time, cleaning the radiator is more efficient.
Youdaoplaceholder0 External cleaning : Use a high-pressure air gun to blow away willow catkins and dust, and then rinse the heat sink with a low-pressure water gun.
Youdaoplaceholder0 Internal cleaning : Inject special descaling agent, idle for 20-30 minutes and then completely empty.
Precautions
Youdaoplaceholder0 Avoid mixing coolant : Different brands may produce sediment.
Youdaoplaceholder0 Handle abnormalities promptly : If the water temperature is too high or the coolant is turbid, an immediate inspection is required.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.
