What should I do if the rear door of the car can't be opened from the inside
The rear door of a car cannot be opened from the inside, which is usually caused by the child lock being activated, the central control lock not being released, or mechanical failure. Youdaoplaceholder0 First, check the status of the child lock (accounting for more than 70% of such problems) , then confirm the central control lock, and finally investigate mechanical issues. If self-handling is ineffective, it is recommended to contact professional maintenance.
Common causes and handling steps
Youdaoplaceholder0 child lock enabled (most common reason) :
There is a lever or knob switch (marked with "Child Lock" or icon) on the side of the rear door. Just pull it to the unlock position.
Youdaoplaceholder0 The central lock is not released :
Make sure the vehicle is stationary. Press the unlock button on the driver's side 2 to 3 times, or try pulling the inner handle twice in a row (this operation is required for some models).
Youdaoplaceholder0 mechanical failure :
The inner handle pull wire has fallen off or broken: The interior panel needs to be removed for inspection or replacement.
Lock block stuck/damaged: Tap the car door or spray lubricant (such as WD-40), if ineffective, replace it.
Youdaoplaceholder0 environmental factors :
If the car door is frozen: Pour warm water (≤50℃) over the door gap to thaw it.
Foreign objects blocking: Clear the debris from the door gap.
The interior of the car door cannot be opened but the exterior can. Youdaoplaceholder0 The most common reason is that the child safety lock is mistakenly activated (especially for the rear doors), followed by the detachment or damage of the inner handle linkage mechanism, and mechanical failure of the lock block . It is recommended to first check the status of the child lock. If it is ineffective, professional repair is required.
Analysis of the main causes
This problem with the car door is usually caused by the following three types of faults, ranked by occurrence probability:
Youdaoplaceholder0 child safety lock activation (most common cause) .
Function design: After the child lock is activated, the internal handle of the rear door is locked, and only the outside can be opened to prevent children from making accidental operations.
Trigger scenarios: Mostly due to passengers mistakenly touching the lever/knob switch on the edge of the rear door panel (marked with a child icon), or mistakenly operating the electronic buttons on the center console.
Proportion: More than 70% of the cases are caused by this.
Abnormality of the pull interlocking mechanism in
The connecting rod has fallen off: Frequent operation has caused the mechanical connecting rod to become loose, and the door panel needs to be removed and reconnected.
Snap breakage: The plastic handle base has aged and broken, and the parts need to be replaced.
Fault manifestation: If you feel weak or have no resistance when gently pulling the inner handle, it indicates this problem.
Youdaoplaceholder0 lock block mechanical or electronic failure .
Lock block damage: Internal spring breakage or gear jamming, the lock block assembly needs to be replaced.
Sensor misjudgment: In some vehicle models, sensor malfunctions may misjudge that the door is not closed, preventing the interior from opening.
Probability: The occurrence rate of such faults is relatively low, accounting for approximately 20% of the cases.
Self-service troubleshooting and resolution steps
Operating in sequence can quickly locate the problem:
Youdaoplaceholder0 Check the lock status of the child (priority step) .
Location: On the side or bottom of the rear door, look for the children's icon lever/knob (some models have buttons on the center console).
Operation: Turn the switch to the unlock direction (the opposite direction of the child icon), and test whether the inner handle regains its function.
Youdaoplaceholder0 test the interlocking status of the handle inside .
If the child lock is closed but still ineffective, gently pull the inner handle:
Feeling powerless → The linkage rod has fallen off or broken, and the door trim needs to be removed for inspection.
There is resistance but no action → The fault of the lock block may be relatively large.
Youdaoplaceholder0 Environmental and operational factor investigation .
Misoperation: Confirm whether the central lock button was mistakenly pressed and re-unlock for testing.
Low-temperature freezing: When the lock core freezes in winter, pour warm water (≤60℃) over the door gap to thaw it.
Youdaoplaceholder0 for repair suggestion .
If the first two steps are ineffective or involve a front door malfunction, a professional technician is required to inspect the lock block and electronic system.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.
