Car floor MATS
Automotive interior components
The car floor mat is an environmentally friendly automotive interior component that integrates five major functions: water absorption, dust absorption, dirt removal, sound insulation, and protection of the main engine blanket. Car floor MATS are interior decorations that protect the cleanliness both inside and outside the vehicle and serve to enhance the aesthetic appeal and comfort.
Car floor MATS can absorb water, dust and dirt effectively prevent the residual moisture and dirt on the soles of shoes from sliding between the clutch, brake and accelerator, avoiding safety hazards and reducing the possibility of the interior being contaminated and damaged. After all, cleaning floor MATS is more convenient and economical than cleaning the interior.
Thick base materials can block chassis noise and tire noise, enhancing driving comfort. The suede car floor MATS can also thoroughly absorb the remaining noise and echoes from the car's audio system, protecting the hearing from damage
Universal floor MATS
Special car floor MATS
Be careful when installing this kind of car floor mat on your car! Floor MATS that affect driving safety and are prone to danger!
Comparison: The universal floor MATS do not fit tightly enough with the car and are prone to sliding, which affects driving safety. It has the advantages of a tight fit to the bottom of the vehicle and safety.
Synthetic fiber floor MATS
Advantage: The car factory selects the original matching material floor MATS.
Disadvantages: It is rather difficult to maintain and will get dirty over time.
Linen foot pads
Advantage: Low price.
Disadvantages: It feels relatively soft to the touch, is prone to pilling after washing, and will deform after several washes, causing the surface of the foot pad to sink deep when stepped on, affecting comfort. To prevent sliding, it is recommended to replace it frequently.
PVC foot pads
Advantage: It is easy to clean.
Disadvantages: It tends to harden and slide in winter. The quality of raw materials for some products is uncontrollable and it has a strong smell.
Rubber foot pads
Advantages: Rubber foot pads, like plastic ones, are very easy to clean. Rubber floor MATS are less prone to deformation when the temperature fluctuates greatly and are suitable for use in both winter and summer.
Disadvantage: The taste is rather strong.
Woolen foot pads
There are two types: velvety and pure wool. Handmade products are generally more expensive and not easy to maintain.
Leather foot pads
Advantages: For example, three-dimensional floor MATS are easy to clean.
Disadvantages: It does not absorb water or dust and has poor sound insulation
Silk ring foot pads
Advantages: The bottom is equipped with anti-slip nails to prevent sliding during use. The surface layer is filamentous, capable of absorbing various dust and sand, with strong dirt absorption capacity. It can keep the interior of the car clean for a long time and is suitable for use all year round. Moreover, the cleaning of the silk ring floor MATS is very simple. When washing the car, just use a water gun to clean them. So the silk ring foot mat is a type of foot mat that is both safe to use and easy to maintain.
Disadvantage: The price is relatively high.
Latex foot pads
Advantages: Environmentally friendly, healthy, odorless, good flame retardancy, excellent anti-slip performance, and extremely easy to clean. It is an excellent material for making floor MATS.
Disadvantage: Latex floor MATS are not mainstream in the Chinese market, and this market still awaits joint development by merchants and consumers.
Imitate the original car floor mat cutting method
This method is only applicable when the original car floor mat is suitable (it works better to widen the edges by 1 to 2 centimeters by imitating the original car floor mat). Simply place the original car floor mat on the Ancheng Tivos floor mat and draw it with a pen. Be sure to turn the original car floor mat upside down and cut it from the back. Only in this way will the cut edges be neater and more attractive. At the same time, the boards can be arranged in the most material-efficient way to avoid waste and save costs.
Tailor-made cutting method
This method can be done by making samples with kraft paper or newspapers and then cutting them according to the size of the driver's seat and the rear seat, which ensures the best effect.
The driver's seat should pay attention to its size. If the size is not appropriate, there will be gaps, causing the floor MATS to shift. Newspapers should be spread all over it, and then the corners should be drawn with a fountain pen
After drawing the outline, cut out the cardboard (0.5 cm wider for the best effect).
The front passenger seat is more focused on aesthetics. It is recommended to draw the route according to the appropriate proportion when making the board. Special attention should be paid to the upper right corner. Due to the different angles, to avoid the floor MATS curling due to the Angle being too high, a certain amount of blank space can be left appropriately.
After cutting, put it in the car to compare the sizes (this ensures a more standard cutting effect).
The rear seats are also an area that requires attention to aesthetics. The cutting methods of the rear seat floor MATS can be divided into one-piece and two-piece. Lay newspapers on the rear seats and draw lines along the rear contour.
After the board is made, arrange it on the back of the foot pad with the least amount of material and then draw the pattern with a paintbrush.
One-piece: Stick the three cardboard pieces in the back row together and connect them. Then place the sample in the back row on the floor mat and draw the pattern with a brush according to the sample.
Note: It should be noted here that since the paperboard is made from the front, when typesetting on the footpads, the paperboard newspaper (kraft paper) needs to be turned over and the outline drawn with a brush to avoid unnecessary losses.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.
