What is a car spray bottle
A car spray bottle is a container used to store and supply windshield washer fluid and is commonly referred to as a spray bottle, glass water tank, or reservoir. Windshield washer fluid is a commonly used preparation in cars, mainly used to clean dirt and dust from the front window to keep the windshield clear and transparent .
The function of a spray bottle
The main function of the spray bottle is to provide cleaning liquid for the car windshield. When the transparency of the front windshield of a car decreases, spraying windshield washer fluid can restore the clarity of the field of vision. Especially when driving at night, the dust on the glass can scatter light and affect the view. This dust and dirt can be effectively removed by spraying windshield washer fluid to ensure safe driving .
Maintenance and replacement of spray kettles
When adding glass water, the following points should be noted:
Youdaoplaceholder0 Regularly check : Regularly check the stock of windshield washer fluid to ensure there is an adequate supply of windshield washer fluid.
Youdaoplaceholder0 Observe the scale line : When adding windshield washer fluid, pay attention to the scale line in the tank. Do not exceed the scale line to avoid waste or affect the usage effect .
Youdaoplaceholder0 Choose the appropriate type of windshield washer fluid : Select the appropriate type of windshield washer fluid based on the season and climate conditions to ensure the best cleaning effect. For example, use antifreeze windshield washer fluid in winter to prevent freezing .
The main function of a car spray bottle is to clean car Windows . It cleans the front windshield of a car by spraying windshield washer fluid to remove dirt and dust, ensuring a clear driver 's view .
The working principle of a car spray bottle
A car spray bottle uses an internal pump or motor to drive nozzles to spray windshield washer fluid in a mist form onto the windshield, which is then cleaned by wipers to remove dirt and moisture .
Maintenance and care suggestions for car spray bottles
Youdaoplaceholder0 Check the working condition of the spray bottle regularly to ensure that the nozzle is not clogged and the water is sprayed smoothly.
Youdaoplaceholder0 Change the windshield washer fluid regularly Avoid using expired or inferior windshield washer fluid to prevent damage to the spray bottle and windshield.
Youdaoplaceholder0 To clean the spray bottle , you can use clean water or a special cleaner to clean the inside of the spray bottle regularly to prevent the accumulation of impurities.
The repair method for CAR water spray bottle leakage needs to take different measures according to the location of the leakage and the degree of damage . The specific steps are as follows:
Step One: Locate the leakage point
Open the hood, inspect the water spray bottle, connecting pipe, water spray motor and nozzle and other components, and look for the location of the water leakage.
Step Two: Targeted repair
Youdaoplaceholder0 Cracks or damage to the pot :
Youdaoplaceholder0 Small cracks : After cleaning the surface, repair it with a strong adhesive with good heat resistance and water resistance (such as epoxy resin or AB glue) to ensure a good seal.
Youdaoplaceholder0 Large cracks or severe damage : It is recommended to replace the spray bottle with a new one as glue repair may not be able to withstand long-term water pressure.
Youdaoplaceholder0 Leaking at the interface :
Youdaoplaceholder0 Loose water pipe or motor joint : Re-tighten and reinforce with sealant.
Youdaoplaceholder0 Gasket aging : Replace with a gasket of the same model and ensure proper installation.
Youdaoplaceholder0 Clogged or damaged nozzle :
Use a fine needle to clear the blockage. If the nozzle is cracked, it needs to be replaced.
Youdaoplaceholder0 Water spray motor seal failed :
Replace the sealing ring after disassembling the motor, or replace the motor directly.
Precautions
Youdaoplaceholder0 Check the lid seal first If the lid is not tightened properly or the seal ring is aged, leakage can also occur.
Youdaoplaceholder0 DIY repair with care Complex disassembly may damage peripheral parts (e.g. Fenders and hubs need to be removed in the reference case). If you have no experience, it is recommended that you seek professional maintenance.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&750 auto parts welcome to buy.
