What is a car trunk support pole
Youdaoplaceholder0 Car trunk struts , often referred to as "trunk support rods" or "trunk pull rods", are mainly used to support the trunk lid to open or close firmly .
This type of support bar is usually designed with a pneumatic top bar or gas spring, which provides sufficient support when the trunk is opened to ensure that the trunk lid can remain firmly open .
Type and Design
There are mainly two types of car trunk struts:
Youdaoplaceholder0 Pneumatic pushrod : This type of pushrod works based on the principle of pneumatic pressure, providing support by compressing and releasing gas. When the lock is released, the air lever lifts the trunk lid, making it easy to open .
Youdaoplaceholder0 Hydraulic rod : Similar to a pneumatic ejector but operates on a hydraulic basis. They provide support by compressing and releasing liquid, and also provide steady support when the trunk is opened .
Installation and maintenance
When installing the trunk struts of a car, it is necessary to ensure that they are firmly fixed to prevent loosening or falling off during driving. For maintenance, the working condition of the struts should be inspected regularly to ensure that their pneumatic or hydraulic systems are functioning properly and damaged parts should be replaced in time .
Price range and brand recommendations
The prices of car trunk struts vary among different brands and models. For instance, the prices of some high-quality pneumatic top rods range from tens to hundreds of yuan, with the specific price depending on factors such as brand, material and design. It is recommended to choose products of well-known brands such as "no-hole clothesline", etc. These products usually have good quality and after-sales service .
The main functions of car trunk struts include providing support, maintaining stability and providing convenience. Specifically:
Youdaoplaceholder0 provides support : The struts provide the necessary support through a hydraulic or pneumatic system to ensure that the trunk lid remains stable when opening and closing. When the trunk switch is pressed or the handle is pulled, the hydraulic fluid in the hydraulic rod flows, causing the trunk lid to spring up and open. When closed, the hydraulic rod uses hydraulic pressure to press down the trunk lid and lock it in place .
Youdaoplaceholder0 Maintain stability : The struts provide sufficient support and stability through their hydraulic or pneumatic systems to ensure that the trunk lid is not damaged or deformed during frequent opening and closing. This stability is essential for protecting the trunk lid and the contents inside .
Youdaoplaceholder0 Provides convenience : The struts make it easier to open and close the trunk, reducing the effort of manual opening and closing and enhancing the convenience of use .
The main causes of CAR trunk struT failure include high hydraulic rod pressure, hydraulic rod oil leakage, sealing ring aging, bolt position change, etc. . These problems can cause the struts to fail to support the suitcase properly or even completely fail.
The cause of the fault and the solution
Youdaoplaceholder0 Excessive pressure exerted by the hydraulic rod : When the trunk is closed, excessive pressure exerted by the hydraulic rod may cause a slight change in the position of the bolt, affecting its stability. The solution is to lubricate the trunk and check if the bolts need to be repaired or adjusted .
Youdaoplaceholder0 Hydraulic rod leakage : Hydraulic rod leakage can cause the strut to fail and a new hydraulic strut needs to be replaced .
Youdaoplaceholder0 Sealing ring aging : After long-term use, the sealing rings in the hydraulic system may age or become damaged, causing hydraulic oil leakage and subsequently reducing the supporting force. The solution is to replace the seal with a new one .
Youdaoplaceholder0 Bolt position change : Due to the high pressure of the hydraulic rod, closing the trunk may cause a slight change in the original bolt position of the vehicle. The solution is to lubricate the trunk and make sure the bolts are in a stable position .
Maintenance and care suggestions
Youdaoplaceholder0 Regular inspection and maintenance : Regularly check the condition of the hydraulic rods, replace aging seals and damaged parts in time to avoid losing more than you gain.
Youdaoplaceholder0 Avoid overuse : Avoid frequent and forceful closing or prolonged opening of the trunk to extend the service life of the hydraulic rod.
Youdaoplaceholder0 Lubrication treatment : Properly lubricate the trunk to reduce friction and wear and keep the hydraulic rod running smoothly .
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&750 auto parts welcome to buy.
