The function of the front brake pads of a car
Youdaoplaceholder0 The main function of the front brake pads of a car is to reduce speed or stop the vehicle by frictional braking . When the driver steps on the brake pedal, the brake pads rub against the brake disc (or brake drum), converting kinetic energy of the vehicle into heat energy and dissipating it to ensure the braking system keeps working effectively .
The working principle of brake pads
Brake pads are composed of steel plates, adhesive heat insulation layers and friction blocks. The insulation layer is made of non-conductive materials and is designed to insulate the heat generated during braking. The friction block is made of friction material and adhesive, and when braking, it is squeezed against the brake disc and brake drum to produce friction, thereby achieving the purpose of decelerating the vehicle brake .
The types and materials of brake pads
Brake pads can be classified into various types based on their materials, such as semi-metallic brake pads, NAO friction materials, powder metallurgy friction materials, and carbon fiber friction materials, etc. Different materials of brake pads vary in abrasion resistance, braking effect and application .
The replacement cycle and maintenance suggestions for brake pads
The replacement cycle of brake pads is influenced by factors such as driving habits, road conditions and materials. Generally, the replacement cycle for the front brake pads of a regular family car is 30,000-50,000 kilometers, and for the rear brake pads it is 50,000-80,000 kilometers .
Car owners should regularly check the thickness of the brake pads. When the thickness reduces to one-third of the original thickness, they should be replaced in time. In addition, when replacing, use the original factory brake pads, and after replacement, gently press the brake pedal a few times to eliminate the gap between the brake disc and the shoe .
Motor front brake pad is a brake pad installed in the front wheel braking system of a motor vehicle, whose main function is to slow down or stop the vehicle by friction. Brake pads are made up of steel back, friction block, adhesive insulation layer and other components, the friction block is the core component, made up of friction resistant material and adhesive, friction with brake disc or brake drum during braking, thereby reducing speed .
Replacement cycle and maintenance suggestions
The front brake pads of an ordinary private car generally need to be replaced every 30,000 to 50,000 kilometers of driving. However, the specific replacement cycle is not fixed. It is affected by road conditions, driving habits and the frequency of brake usage. If you feel the brakes are soft or the braking distance is longer, or you hear a metallic friction sound, the brake pads may be worn out to the limit and need to be replaced .
Brake pads of different materials and their properties
There are three main materials for brake pads: semi-metallic, low-metallic and ceramic. Semi-metallic brake pads are the most common and relatively inexpensive, suitable for ordinary family cars. Brake pads with less metal have better performance and are usually used in mid-range vehicles. Ceramic brake pads have the best performance, but they are also the most expensive and are often used in high-end cars. When choosing brake pads, it is recommended to consider the vehicle type and driving conditions comprehensively to ensure driving safety and comfort .
The main manifestations of front brake pad failure include brake shake, abnormal brake noise, brake softening or hardening, brake deviation or deviation, . These malfunctions not only affect the driving experience but may also pose a serious threat to driving safety.
The cause and impact of the malfunction
Youdaoplaceholder0 Brake shake : Excessive wear and uneven surface of the brake pads, or deformed brake discs can cause the front wheels to shake when braking. This shaking not only affects driving comfort, but can also damage the braking system .
Youdaoplaceholder0 Abnormal brake noise : When the brake pads wear to the limit, a shrill metallic friction sound is produced. Continued use may cause brake discs to be scrapped, increase repair costs and safety hazards .
Youdaoplaceholder0 Brake becomes soft or hard : Brake becomes soft usually due to brake fluid leakage or air entering the system, resulting in reduced braking force; Hard BRAKE MAY be due to vacuum booster pump failure, which makes it feel very difficult to step on the brake .
Youdaoplaceholder0 Brake deviation or veer : A damaged brake caliper or uneven wear of brake pads can cause the vehicle to veer to one side when braking, increasing the risk of an accident .
Preventive measures and solutions
Youdaoplaceholder0 Check the thickness of the brake pads regularly : Check and replace the brake pads every 50,000 kilometers or so to ensure they are not less than 3mm thick .
Youdaoplaceholder0 Pay attention to abnormal wear of the brake pads : If you find uneven or abnormal wear of the brake pads, adjust or replace the relevant parts in time .
Youdaoplaceholder0 Keep the brake system clean : Avoid getting small stones or sand between the brake pads and brake discs. Regularly remove foreign objects from the brake system .
Youdaoplaceholder0 Timely maintenance : Once any abnormality in the braking system is detected, stop the vehicle immediately for inspection. Professional maintenance should be carried out if necessary to avoid losing more than you gain .
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&750 auto parts welcome to buy.
