There's a noise behind the trailer
The reasons for the abnormal noise behind the trailer cover may include the following :
Hood lock block not fully locked : The hood lock block may not be fully locked when driving on bumpy roads, resulting in an abnormal sound. The solution is to open the hood and close it again, making sure the lock block is fully locked .
body stiffness is not enough : the vehicle deformation during driving, resulting in the door and the frame friction or shake, or some places off welding and friction between the steel plate. This condition usually requires a professional to check and repair .
Problems with shock absorbers, springs, or suspension components : Problems with shock absorbers, springs, and rubber sleeves at the iron bowls of the springs and shock absorbers may cause abnormal sound. The solution is to inspect and replace the damaged parts .
Screws loose in chassis, rear axle, tires, etc : screws loose will cause abnormal sound due to vibration during driving. The solution is to check and tighten all screws that may be loose .
The dust cover hardens : The dust cover hardens and produces abnormal noise when it is rubbed against other components. The solution is to cut off the excess dust cover to reduce friction .
exhaust pipe problem : Loose, damaged, or aging exhaust pipes may cause abnormal sound. The solution is to inspect and replace the damaged exhaust pipe components .
Trunk empty : When the trunk is empty, the interior panels tend to resonate and make a sound. The solution is to place some items in the trunk to reduce resonance .
Prevention and maintenance recommendations :
Regular inspection and maintenance : Regular inspection of all parts of the vehicle to ensure that screws are fastened, shock absorbers and springs are working properly.
Lubrication and maintenance : Properly lubricate hood lock blocks and other moving parts to reduce friction and noise.
Place items : Place some items in the trunk to reduce resonance and abnormal noise.
professional maintenance : in case of complex problems, such as insufficient body stiffness or engine and gearbox problems, it is recommended to go to a professional maintenance shop for inspection and maintenance.
The main function of the trailer cover is to protect the trailer hook and enhance the aesthetic appearance of the vehicle . The trailer cover plate is usually made of plastic, the same material as the rear bumper, can be opened and closed freely, and the shape and size vary by vehicle type. Its main functions include:
protect trailer hook : trailer cover can protect the trailer hook from the erosion of the external environment, extend its service life .
improve aesthetic : trailer cover can make the appearance of the vehicle more beautiful atmosphere, improve the overall aesthetic feeling .
emergency rescue : in some cases, the trailer hook provides necessary support in emergency rescue or towing light objects .
Open method
The method of opening the trailer hook cover is as follows:
Find the location : The trailer hook cover is usually located under the bumper. The place covered by the round or square cover is the trailer hook location .
Try pressing : You can press repeatedly on all sides of the trailer hook cover to find an Angle .
Use the tool : if pressure does not work, use a knife or stick to carefully pry open along the perimeter.
Disassembly and installation : After prying open, pull the trailer hook cover outward to reveal the trailer hook mounting position. Remember to carefully put the lid back on after use.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&750 auto parts welcome to buy.
