• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HKHA-1308010B_Electronic-Fan-Assembly-I zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:1308010B

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HKHA-Cooling-Pipe-Assembly-3
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 1303120
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HKHA-1308010B_Electronic-Fan-Assembly-I
HKHA-1308010B_Electronic Fan Assembly I

Product knowledge

 

What are the components of the automotive electronic fan?

The automotive electronic fan assembly is mainly composed of the motor, fan blades, protective cover, and control module. It is a heat dissipation module driven by the motor and controlled intelligently by the ECU.
Core Components
Motor part: Stator, rotor, bearings, carbon brush holder (brushed motor), etc., responsible for converting electrical energy into rotational power.
Fan blades: Fixed on the rotor shaft, rotating to generate airflow and achieve cooling.
Protective cover/shell: Flow guiding and fixation structure, partially integrated in the fan assembly.
Control module: Receives signals and controls the on-off and speed of the fan, being the key execution component of the electronic fan.
According to the differences in vehicle models and configurations
Pin configuration is different: The small pins of the control module are signal lines, and the large pins are power lines. The number and arrangement of pins vary for different vehicle models and single/double fan versions, and incorrect installation will cause the fan to fail to work.
Brushed vs. Brushless: Many vehicles still use brushed motors, and once the carbon brushes wear out, the fan stops rotating; brushless motors have higher cost but have advantages in lifespan and efficiency.
Troubleshooting Tips
If the fan is constantly running or not running, it is not necessarily that the fan itself is broken; it could also be a problem with the water temperature sensor, air conditioning pressure sensor, dual thermostat switch, or wiring. When troubleshooting, it is recommended to read the data stream first and do not rush to replace the part.
The core function of the automotive electronic fan assembly is to provide forced airflow to the radiator, helping to cool the coolant, and assisting the air conditioning system in heat dissipation, ensuring that the engine remains within the normal operating temperature range.
The biggest difference between it and traditional mechanical fans is that the electronic fan is driven by the motor and is not directly controlled by the engine speed; instead, the engine control unit automatically decides when to start, stop, and the speed based on signals from the water temperature sensor, air conditioning pressure switch, and dual thermostat switch.
Main function
Engine cooling: When the vehicle is moving at low speed or at idle, there is insufficient wind from the front. The electronic fan kicks in to force air circulation, allowing the coolant to flow through the radiator and effectively cool down, preventing the engine from overheating.
Auxiliary air conditioning system: When the air conditioning is turned on for cooling, the electronic fan also operates to assist in cooling the condenser and maintain the normal working pressure of the air conditioning system.
Precise control: The fan starts when the water temperature typically reaches above 90℃ and stops automatically when it drops within the safe range, avoiding unnecessary power consumption and fuel consumption.
Points to note
The electronic fan relies on sensors and control modules. If the water temperature sensor signal drifts or the thermostat gets stuck, it may cause the fan to keep running or not run at all. Fault codes need to be read for troubleshooting. Don't rush to replace the motor.
After the engine is turned off, the fan may continue to run for a while, especially in summer after using the air conditioner. This is a normal delay for heat dissipation and there is no need to worry.
Common faults of automotive electronic fan components usually manifest as the fan not rotating, low rotation speed, or continuous rotation. The root causes are mostly in the motor, relay, fuse, temperature control switch, sensor, or control module. Start by checking in the direction of the symptoms to avoid blindly replacing parts.
Common Fault Points
Motor damage: Carbon brushes wear out, bearings get stuck, or the winding burns out, which can cause the fan not to rotate, have insufficient rotation speed, or make abnormal noises during rotation. If you feel the fan blades are stuck when you move them by hand, or the fan does not rotate after power-on, it is likely a motor problem.
Relay or fuse failure: Oxidation and burning of relay contacts, or fuse melting, will cut off the power supply to the fan. First, check the fuse in the engine compartment labeled "FAN" or "COOLING FAN", and then try replacing the relay. This is a low-cost option.
Temperature control switch or water temperature sensor malfunction: It is normal for the fan not to rotate when the water temperature does not reach the required level; however, if the sensor signal is distorted (such as constantly reporting low or high temperatures), it will cause the fan to either not rotate or rotate continuously when it shouldn't.
Fan control module or wiring problem: The control module is the "commander" of the fan. Short circuits, breaks, loose connections, or oxidation of the plug will cause the fan to malfunction or lose control. Check if the fan plug is oxidized, loose, or if the wire harness is shaking to determine if the fan rotates intermittently.
Air conditioning pressure sensor "lying about the situation": The fan also serves as a heat dissipation component for the air conditioner. A damaged sensor sends a false high-pressure signal, causing the fan to keep running continuously. If all the cooling system components have been checked and the problem persists, it is necessary to turn to the air conditioning system for troubleshooting.
How to determine
Check water temperature performance: When the engine is idling, the water temperature surges; when it starts running, it drops. This is likely due to a malfunction of the cooling fan.
Test with air conditioning: Turn on the air conditioning and listen to whether the fan is operating. Immediately after the air conditioning is turned on, the fan starts running at high speed, and its speed changes with the start and stop of the compressor. This indicates that the control circuit is basically normal; if it is not affected at all, the problem is more likely to be in the water temperature sensor or control module.
Test by unplugging the plug: Turn off the engine and cool it down, then unplug the thermostat switch or water temperature sensor plug. The fan immediately stops rotating, indicating that the motor and relay are normal. The problem is likely in the sensor or control signal; if it still rotates at high speed, check for stuck contacts or control module.
Any inspection involving circuits or cooling systems must be conducted when the engine is turned off and completely cooled to avoid risks of high-temperature and high-pressure coolant splashing or circuit short-circuiting.
Maintenance strategy
For electronic control faults, prioritize reading the data stream and avoid blindly replacing parts. Use the diagnostic computer to read the real-time values of the water temperature sensor and fault codes. The normal water temperature during hot starting should be stable between 90°C and 105°C. If the data stream is abnormal, then check the components specifically. This can significantly reduce the amount of disassembly work.
A malfunctioning fan or a fan that rotates for a long time is not a minor issue. If not addressed for a long time, it can cause excessively high water temperature, boiling of the water tank, and in severe cases, engine damage due to cylinder sticking. If the problem persists after self-inspection, it is most reliable to go to a professional repair facility and use the diagnostic computer to read the data stream.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products