• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HKAA-1026010-Engine-Fuel-Evaporation-Pipeline-I-Assembly zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:1026010

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HKAA-Engine-Fuel-Evaporation-Pipeline-I-Assembly
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 1026010
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HKAA-1026010_-Engine-Fuel-Evaporation-Pipeline-I-Assembly
HKAA-1026010_ Engine Fuel Evaporation Pipeline I Assembly

Product knowledge

 

Automobile engine - fuel - evaporation - pipeline - I - component function

The pipeline components of the fuel evaporation system are responsible for transporting fuel vapors, connecting the fuel tank, carbon canister and the engine intake manifold, and are the "blood vessels" of the entire EVAP system. The specific functions can be viewed in several sections:
‌The pipeline from the fuel tank to the carbon canister: The vapors generated by the heating of fuel in the fuel tank enter the carbon canister through this pipeline and are stored by activated carbon to prevent the vapors from directly being discharged into the atmosphere.
‌The cleaning pipeline from the carbon canister to the intake manifold: When the engine is running, the electromagnetic valve of the carbon canister opens, and the fuel vapors adsorbed in the carbon canister are sucked into the intake manifold through this pipeline and enter the cylinder for combustion, achieving fuel recovery and emission control.
‌The ventilation pipeline: The lower part of the carbon canister is connected to the atmosphere, and fresh air enters to help desorb the fuel molecules, maintaining the system pressure balance.
‌The double check valves and ejector pipeline: In turbocharged vehicles, at low engine speeds, the vapors pass through the right valve into the intake manifold; at high engine speeds, the intake manifold is under positive pressure, and the vapors change to pass through the left valve into the air filter before the low-pressure area, and are sucked in by the high-speed airflow's siphon effect and finally enter the cylinder for combustion.
If the pipeline is damaged or clogged, it will cause abnormal fuel tank pressure, heavy gasoline smell, or unstable idle, and engine fault lights to illuminate. It is necessary to repair it in time.
‌"Fault of the fuel evaporation pipeline I component" usually refers to a problem with the pipeline or related components in the EVAP (Fuel Evaporation Emission Control System), and the most typical manifestation is the activation of the engine fault light.
This type of fault is very common in vehicles of the fifth and sixth emission standards because after the emission regulations became stricter, the system has extremely high requirements for sealing, and any minor leakage will trigger an alarm.‌
Common Fault Points
‌Loose fuel tank cap seal: The most common and easily overlooked. The sealing ring is damaged or not tightened, and the system self-check will determine a leak, as in the case of Dongfeng Fengliang M5.
‌Stuck carbon canister electromagnetic valve: Either always open or always closed will cause abnormal mixture concentration, affecting idle stability and cold start.
‌Old or damaged evaporation pipeline: Cracks in the pipeline or loose joints, especially in vehicles like Volvo, the original evaporation soft pipe is prone to clogging, and aftermarket parts are likely to leak again.
‌Carbon canister failure: Adding too much fuel causes liquid gasoline to enter the carbon canister, and the activated carbon becomes clogged, which is a common problem faced by many car owners.‌
Troubleshooting and Repair Suggestions
‌First, check the fuel tank cap: Check if it is tightened and if the sealing ring is damaged. This is the cheapest step.
‌Read the fault code: Use a diagnostic tool to read the specific code. P0442 is for minor leakage, P0441 is for incorrect flow, and P0443 or P0446 point to the electromagnetic valve or pipeline.
‌Smoke leak detection: Spray smoke into the entire EVAP system. Minor leaks can be located at a glance, which is much more reliable than blindly replacing parts.
‌Don't rush to replace parts: Many repair shops immediately replace the carbon canister or electromagnetic valve at the beginning. However, misdiagnosis risks are very high. It is necessary to test first before repairing.‌
Special Reminder
‌Don't fill up too much fuel: After the fuel pump stops, don't touch the tank again. Otherwise, liquid fuel entering the carbon canister will directly damage it.
‌Be cautious when using aftermarket parts: For example, in Volvo's evaporation pipe, using aftermarket parts saves money but the light will turn on again after a few days, and repeated is more costly.
‌Even after the warranty period, you should still hold the manufacturer accountable: If it is a known batch problem of models like BYD Song PLUS, even after the warranty period, you can report it to the manufacturer and ask them to bear the repair costs.‌
If the fault light is on but there are no obvious abnormalities when the car is running, you can first go to a reliable repair shop for smoke leak detection. Don't rush to dismantle and replace parts. Often, it's just a matter of one pipe or one cover.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products