• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-6207111_Left-Rear-Door-Sealing-Strip_S00000 zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:6207111

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-Left-Rear-Door-Sealing-Strip_S00000
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 6207111
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-6207111_Left-Rear-Door-Sealing-Strip_S00000
HAD-6207111_Left Rear Door Sealing Strip_S00000

Product knowledge

 

The function of the sealing strip on the left rear door of the car

The main functions of the sealing strip on the left rear door of a car are to prevent water, dust, noise, shock and heat loss. It fills the gap between the door and the vehicle body, forming a sealing barrier.
Specific functions
‌Waterproof and dustproof‌: Prevent rain, mud water and dust from entering the car, keep the interior clean, and prevent rust or dust accumulation at the door frame edges and hinge parts.
‌Sound insulation and noise reduction‌: Seal the door gap, reduce wind noise and road noise entering the cabin when driving at high speed. However, it should be noted that the sealing strip has limited effect on sound insulation. The actual measurement usually only results in 1-2 decibels improvement, mainly improving high-frequency wind noise.
‌Buffering and shock absorption‌: Buffer the impact force when opening and closing the door, reduce direct metal collision and wear, make the closing sound more dull and heavy, and enhance the quality.
‌Heat insulation and energy saving‌: Enhance the airtightness, reduce the leakage of cold and hot air, and help the air conditioner maintain the interior temperature more efficiently.
It should be noted
When the original factory sealant is in good condition, it is not recommended to install additional ones. Improper installation may block the drainage holes, causing water accumulation and rust inside the car door, or disrupt the original vehicle's sealing balance and cause abnormal noises.
If the original vehicle sealant has aged, hardened, cracked or leaked air and dust, it is recommended to replace it promptly. Preferentially choose products made of EPDM (terpolymer ethylene propylene diene monomer) material, which is specifically designed for the vehicle. Before installation, clean the surface and avoid the drainage holes.
The left rear door sealant is broken. The most direct impact is that the wind noise increases, there may be water leakage in rainy weather, and it will also affect the air conditioning effect and the feel when opening and closing the door. Although it is just a rubber strip, it is the first line of defense against water, dust, sound insulation and vibration. Once it is broken, the experience will significantly decline.
Specific impact
Increased noise: When the sealing strips are aged or damaged, wind noise and tire noise are more likely to enter the car cabin during high-speed driving. The noise inside the car may be 5 to 10 decibels higher than normal, and prolonged meetings are more likely to cause fatigue.
Leaking in rainy weather: Rainwater will seep into the car through the gaps, wetting the floor and seats. Over time, it may mold and rust, and it may also damage electronic devices such as audio systems and instrument panels.
Poor dust prevention: Dust and sand will enter the car through the gaps, dirtying the interior and possibly accelerating the wear of internal parts of the car doors (such as door locks and window regulators).
Affecting air conditioning and energy consumption: Poor sealing will cause the air conditioning to lose its effectiveness, reducing the cooling and heating effects in summer and winter. The air conditioning will work harder, and fuel or electricity consumption will increase.
Door closing feel and safety: The sealing strips can provide a buffer. If they are damaged, the sound when closing the door will become brittle. When severely deformed, they may not close properly, and there is even a risk of the door opening accidentally during driving.
How to handle it
First, check: Look for cracks, fractures, hardening, or glue separation of the sealing strips. You can also test the sealing performance by inserting a piece of paper when closing the door.
Small cracks can be repaired: If the crack is not large, you can use a special adhesive for sealing strips to repair it.
If the aging is severe, replace it: If the strip is severely deformed, loses elasticity, or is damaged, it is recommended to replace it directly. If you are handy, you can purchase a special sealing strip for the car and install it yourself, with prices ranging from several tens to several hundred yuan; go to a repair shop or 4S store to replace it, and the cost is higher, mainly due to the labor cost.
Before replacement, clean the dust and old glue residue on the edge of the door frame, and use a bonding agent to enhance the adhesion of the back adhesive. This way, the new strip will fit better and be less likely edge or fall off.
Sealing strip aging on the rear door: First, check the degree of aging: If it is only partially detached and the rubber strip is still soft, reattach it; if it has hardened, cracked, or deformed, it is best to replace it directly to solve the problem completely.
Partial detachment: Reattach
Clean the bonding surface: Use a damp cloth to wipe off the dust, oil stains, and old glue residue on the back of the car door panel and the rubber strip, and let it dry completely. This step is not done well, and the glue will soon fall off again.
Choose the right adhesive: Use 401 glue or 3M double-sided adhesive, apply it evenly to the open glue area, and do not apply too much to avoid spilling and dirtying the paint surface.
Press and fix: Press from top to bottom to adhere, and wait 24 hours before frequently opening and closing the car door forcefully. Wait for the glue to fully solidify.
Severe aging: Replace directly
Judgment criteria: If the rubber strip has large-scale cracking, hardening, losing elasticity, or repeatedly detaches and falls off, do not reattach it; replace it directly.
Purchase options: Preferably choose a special sealing strip that matches the model and year of the car. EPDM (triple rubber) material has better weather resistance; if your manual skills are average, go to a 4S store or car beauty shop to replace it. When replacing yourself, remember to clean the residual glue stains and retain the drainage holes of the car door.
Add auxiliary: For some models with larger gaps between the rear door, you can add a Z-shaped sealing strip at the door frame or hard plastic position for double-layer protection, which can reduce wind noise, but choose a product with good corner fit to avoid edge.
Daily maintenance
After washing the car, apply a layer of special maintenance wax or silicone-based lubricant to the sealing strip regularly to restore elasticity and delay aging. Do not use WD-40, as it will accelerate rubber aging.
Park in underground garages or shady areas as much as possible to reduce direct exposure to ultraviolet rays, which is the main accelerating factor for rubber aging.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products