• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-6106100A_Left-front-door-upper-hinge-assembly_M00000 zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:6106100A

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-Left-front-door-upper-hinge-assembly_M00000
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 6106100A
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-6106100A_Left-front-door-upper-hinge-assembly_M00000
HAD-6106100A_Left front door upper hinge assembly_M00000

Product knowledge

 

Replacement of the hinge components on the left front door of the car

The hinge assembly of the left front door of the car needs to be replaced. The key steps are to first support the door properly, mark the position accurately, then disassemble and assemble it in a diagonal sequence, and finally tighten it using a torque wrench with the standard torque. This job can save time and costs if done by oneself, but it requires the cooperation of two people. Moreover, the screw specifications and torque requirements vary greatly among different car models. It is necessary to consult the repair manual first.
Preparation before replacement
‌Check Accessories‌: Ensure that the new hinge is compatible with the vehicle model. It is best to check the accessory number by VIN code. Different model years may have different specifications.
‌Prepare Tools‌: Socket wrench (common T30/T40/T50 or 13mm), torque wrench, marker pen, masking tape, pedestal jack, rust remover, lubricating grease.
‌Safety Support‌: Park the vehicle on a flat surface, engage the handbrake, open the left front door and lower the window. Use the pedestal jack to support the car door from the bottom. Place a soft cloth on the contact surface to prevent damage to the paint.‌
Remove Old Hinge
‌Draw Positioning Lines‌: Use masking tape to stick on the side of the vehicle and the hinge of the door. Draw lines along the edge of the hinge. This is the position reference for reinstallation.
‌Screw Removal Order‌: Remove the bolts on the side of the vehicle first, then the bolts on the door side. Do not remove the last bolt first to prevent the door from falling.
‌Deal with Rust‌: If the screws cannot be unscrewed, spray rust remover for a few minutes. Do not force them.
‌Remove Old Hinge‌: Someone can assist in holding the door gently and remove the hinge.‌
Install New Hinge
‌Clean Installation Surface‌: Clean off dust, oil, and old rust stains to ensure a tight fit.
‌Pre-tighten Screws‌: Align the new hinge with the holes and manually pre-tighten all screws. Do not lock them immediately to leave room for adjustment.
‌Align the Door‌: Slowly close the door to check if the gaps between the door, the vehicle body, and the fender are uniform. Check if the door edge is level. Adjust the hinge position if there is any deviation.
‌Tighten Diagonally‌: Use a torque wrench according to the specified values in the maintenance manual. Tighten diagonally in a cross pattern, starting from the side of the vehicle and then the side of the door.
Key Reminder
The torque value must be determined based on the vehicle model: The body side bolt of the front door hinge on the Tesla Model 3 is 23 Nm, the hinge screw of the Ford hood is 20-25 Nm, and the adjusting screw of the door hinge is usually 10-15 Nm. The differences vary greatly among different vehicles, so don't tighten it based on your intuition.
The adjustment range of the door is limited: The adjustment range of the hinge screw is approximately 2.8 millimeters. If the displacement exceeds 5 millimeters, it indicates that the hinge pin is worn and a complete replacement is required instead of adjusting.
Post-installation lubrication: After installation, apply the special lubricant at the hinge pin, do not use ordinary grease, as it is prone to absorb dust and accelerate wear.
If the vehicle has recently been involved in a collision accident, the vehicle frame or door sheet metal may have deformed. Replacing the hinges cannot solve the fundamental problem; it is necessary to go to a professional repair facility for measurement and correction.
There are differences in the disassembly and assembly details for different vehicle models. Please tell me the specific model and year, and I will help you find more accurate hinge part numbers and torque standards.
The left front door hinge component of the car is used to connect the door to the body, supporting the weight of the door and ensuring its normal opening and closing.
It works in conjunction with the limiter to allow the door to securely attach to the vehicle body and rotate along a specific trajectory.
What specific functions does it undertake?
Carrying the weight of the door: The hinge continuously supports the door, dispersing the weight and collision impact force to the vehicle frame when closing, preventing the door from sinking or falling off.
Ensuring smooth opening and closing: The pin serves as the rotation center, allowing the door to open and close in a stable trajectory. The bushing reduces metal friction and avoids jamming and abnormal noise.
Affecting safety performance: During a collision, the hinge transmits the impact force to the vehicle, and sufficient strength is required to ensure that the door does not deform or fall off, facilitating escape and rescue.
Official media
Cautionary Notes
The abnormal noise of the hinges is mostly caused by lack of oil. Clean the shaft with WD40 and then apply lithium-based lubricating grease. Have it maintained every 20,000 kilometers or once a year.
If the door sinks by more than 3mm or the hinges are severely worn, it is recommended to replace the hinge assembly. Do not just tighten the screws.
In daily use, avoid forcefully swinging the door. In humid areas, apply anti-rust oil once every 3 months, which can significantly extend the lifespan.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products