• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-5401117Q70-Rear-center-installation-bracket-for-fenders-M00666 zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:5401117Q70

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-Rear-center-installation-bracket-for-fenders-M00666
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 5401117Q70
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-5401117Q70_-Rear-center-installation-bracket-for-fenders-_-M00666
HAD-5401117Q70_ Rear center installation bracket for fenders _ M00666

Product knowledge

 

The function of the mounting bracket installed at the rear of the car fender

The core function of the mounting brackets installed at the rear of the car fender is to fix and support the fender, allowing it to remain stably attached to the rear of the wheels, thereby fulfilling the functions of protecting against splashes and preventing damage to the vehicle body. Without the brackets, the fender would either fail to stay in place or shake during driving, significantly reducing its protective effect.
Specifically, the functions of the brackets can be divided into the following aspects:
‌Structural fixation‌: Firmly connecting the fender to the vehicle body, usually by using the pre-existing screw holes or snap-in positions on the vehicle, ensuring that it does not loosen or fall off during driving.
‌Shock absorption and stability‌: Good bracket designs incorporate shock absorption structures, such as rubber shock rings, which can effectively reduce vibrations during driving, improving the stability and durability of the fender, and also preventing abnormal noises.
‌Position adjustment and adaptation‌: Some brackets are adjustable, allowing them to adapt to different vehicle models, tire sizes, or installation angles, such as being able to be adjusted up, down, left, or right, for better fender adhesion.
‌Indirect protection effect‌: By stabilizing the fender, it indirectly fulfills the function of the fender itself - preventing stones and sand from flying and hitting the vehicle's paint, reducing the chance of dirt splashing onto the vehicle or the tie rods and ball joints, and also reducing the interference of rainwater splashes on the rear-view of other vehicles.‌
It should be noted: The brackets themselves are not decorative pieces. If they are damaged or missing, the fender is prone to loosening or falling off during high-speed driving or bumpy roads, and it is recommended to regularly check if the fixing screws are tightened.
Faults in the rear mounting brackets can be determined by checking whether it is a bracket fracture, a slipping screw, or a loose hole. Then, decide whether to repair or replace.
The handling methods vary depending on the situation. Follow the steps below to troubleshoot.
First, determine the type of fault:
‌Bracket fracture‌: Metal or plastic brackets crack or break, and the force-bearing structure has failed. Minor cracks can be reinforced with plastic welding or metal welding; severely cracked or deformed ones should be replaced directly.
‌Screw slippage or detachment‌: The screw rotates in the hole, is not tightened, or is completely removed. Slipping can be filled with sealing tape, thread sealant, or rubber bands to increase the grip; severely worn hole positions should be replaced with self-tapping screws of a slightly larger diameter and re-drilled.
‌Loose hole or cracked hole‌: The plastic hole is enlarged or cracked. It can be repaired with a plastic welding gun, or temporarily fixed with a clip or cable tie, but it is recommended to replace or weld and reinforce it in the long term.‌
Repair and reinforcement methods
‌Minor damage - DIY‌: Clean the damaged area, weld the cracks with a plastic welding gun, and smooth it; for screw holes with slipping, fill with sealing tape or apply thread sealant before reinserting. Tighten evenly in a diagonal sequence, do not lock all at once.
‌Bracket deformation or fracture - Reinforce or replace‌: If the deformation is not severe, it can be repositioned with iron wire or cable ties; if it is broken, it is recommended to replace with an improved bracket or weld and reinforce the bending point with steel plates before replacing with a longer screw for fixation.
‌Repeated faults - Find the root cause‌: If the same location repeatedly malfunctions, it may be due to insufficient strength of the bracket or uneven force distribution at the installation hole. Consider replacing with a reinforced bracket or having it handled at a professional repair shop to avoid falling off on the road and affecting driving safety.‌
Notes for Attention
After the repair, check the stability by pushing and pulling the mudguard. Make sure all the screws are tightened and there are no gaps. Then, drive on.
The rear wheel space is small. When operating, first pull the handbrake, use a jack to lift it up and provide proper support. Don't rely solely on the jack to bear the force.
If the bracket is severely broken or multiple repairs are ineffective, it's more convenient to replace it with a new one. Don't try to weld it and continue to use it.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products