What is the rear connecting plate of the right rear floor of the car?
The rear connection plate of the car's right rear floor is a sheet metal component located at the rear side of the rear floor assembly. Its main function is to connect the rear floor with the right side of the vehicle structure (such as the rear frame beam, side panel, wheel well, etc.), forming a complete rear load-bearing framework.
Specific location and structure
This plate is located near the bottom of the trunk and the inner side of the right rear wheel. It serves as a "bridge" between the rear floor frame and the vehicle side structure. Patent information indicates that the rear floor is usually divided into the front section and the rear section. There are connection plates on both the left and right sides, and the rear floor connection plate on the right rear side refers to the connection plate of the right rear section. It is generally welded or riveted between the rear floor body, the rear frame beam, and the side panel to form a closed cavity, enhancing the overall stiffness of the rear of the vehicle.
Main function
Structural Connection: Connect the rear floor with the right rear longitudinal beam and the side panel to form a whole, allowing the force to be dispersed along the vehicle path.
Collision Protection: Participate in the force transmission and energy absorption during rear impact, protecting the fuel tank, battery, and rear passengers.
Support and Sealing: Support the rear vehicle structure and help maintain the sealing of the trunk bottom, reducing noise and vibration.
Maintenance Notes
If this plate is damaged due to a rear-end collision and needs to be cut and replaced, it is usually considered an accident vehicle repair, which will affect the valuation of a used car. It is recommended to focus on checking the rust prevention treatment of the welds during repair to avoid rusting later.
Car Right Rear Floor Rear Connection Plate's core function is to connect and fix the rear vehicle structure, and participate in the force transmission and energy absorption during a collision, ensuring the rigidity of the vehicle and the safety of the rear passengers. It belongs to a key structural component of the vehicle rear and its main functions can be divided into the following parts:
Structural Connection and Support
- Connect the left and right rear longitudinal beams: Connect the rear ends of the two rear longitudinal beams to form a stable frame, enhancing the torsional stiffness and structural stability of the rear of the vehicle.
- Connect the rear floor with surrounding components: As a transition connecting piece between the rear floor assembly and the rear fender, rear longitudinal beam, and the rear section of the rear longitudinal beam, it forms a complete closed structure at the rear of the vehicle.
Collision Safety and Energy Absorption
- Absorb and distribute impact during rear-end collisions: The connection plate absorbs a small amount of energy during the collision, and then transfers most of the impact force to the energy absorption box and the rear longitudinal beam. The energy absorption box collapses and deforms to absorb the impact energy, reducing the impact on the passenger compartment.
- Protect the survival space for rear passengers: Form a triangular mechanical structure with the rear bumper beam, rear longitudinal beam, and floor crossbeam, quickly dispersing the local impact force to the entire vehicle frame, avoiding severe deformation of the vehicle body due to concentrated force.
Stiffness and Durability Assurance
- Enhance local stiffness of the vehicle: The connection plate strengthens the anti-impact ability through design such as strengthening ribs, reducing deformation during impact, and ensuring the stability of the rear longitudinal beam structure.
- Affect the NVH performance of the entire vehicle: As a part of the rear floor assembly, it has an impact on the sealing of the passenger compartment and noise and vibration control.
"Car Right Rear Floor Rear Connection Plate" usually refers to the structural connection plate connecting the right rear floor of the white body to the longitudinal beam or crossbeam, belonging to the chassis-bearing components of the vehicle, not the tailboard (trailer lift tailboard). Faults are often manifested as cracking, wrinkling, abnormal sounds, or deformation, and are commonly caused by stamping forming defects, collision damage, or weld fatigue.
Fault Nature and Common Manifestations
- Stamping forming defect: The floor crossbeam connection plate often uses high-strength steel (such as B340LA), and during stamping, cracks or wrinkles are prone to occur at positions such as step concavities, upper R-angles, and lower concavities, related to mold design, material size, and transition surface structure.
- Collision deformation: After the right rear part is affected by a rear-end or side collision, the rear floor, rear fender, and connection plate may deform or the welds may tear, and may require sheet metal correction or replacement.
- Abnormal sound source: A "creaking" or "thumping" sound from the right rear floor during driving may be caused by loose welds, loose interior panel fasteners, aging rubber bushings of the rear suspension, or collision of items in the trunk.
Troubleshooting and Handling Suggestions
- Locate the sound source or damage first: Press the right rear floor and the rear seat area on the spot, or listen to the sound over ; if there is a loose feeling when tapping the interior panel, it is usually a problem with the trim or fasteners.
- Check the welds and connection components: Lift the vehicle to check if the welds of the right rear floor connection plate are cracked or rusted, and if the screws are loose; if so, re-tighten or re-weld.
- Sheet metal repair or replacement: If the deformation or cracking is severe, it is necessary to cut, correct, and weld according to the maintenance manual, and perform rust prevention and cavity wax injection treatment to avoid subsequent corrosion.
- Professional Diagnosis: If it involves vehicle structural components, it is recommended to handle it at a 4S store or a professional sheet metal shop, do not forcefully pry or simply glue and patch, to avoid affecting the collision safety.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.