What is the rear deceleration impact block of the car?
The rear shock absorber buffer block in a car is usually referred to as the rear shock absorber cushion block (also known as the rear shock absorber rubber block). It is a rubber buffer component in the suspension system, mainly used to absorb and cushion road impacts and prevent the metal parts of the shock absorber from directly colliding.
Specific functions:
Buffer and shock absorption: Absorbing the repeated bouncing and impacts caused by the road, accelerating the attenuation of spring vibration, and improving driving comfort.
Protecting the shock absorber: Providing a buffer when the shock absorber compresses to the bottom of its stroke, preventing direct metal collision, and extending the lifespan of the shock absorber and the vehicle structure.
Supporting the body: Maintaining the installation height of the shock absorber, ensuring the normal posture of the vehicle body and the geometry of the suspension.
Aging signals:
The buffer block is a rubber component. As the mileage increases, it will age and break. Common symptoms include:
A dull "thud thud" impact sound when passing over speed bumps
Significant sagging of the rear body
Shock absorber leakage of oil
Obvious abnormal sounds on bumpy roads
The rear shock absorber buffer block (usually called the rear shock absorber cushion block or the rear axle limit block) has three main functions: buffer and shock absorption, protecting the suspension components, and improving passenger comfort. It is usually installed in the suspension system and is made of rubber or polyurethane, serving as the "last line of defense" for the suspension.
Core function
Buffering and Energy Absorption: When the vehicle passes over bumps,bumps or is rear-ended, the impact blocks are first compressed and deformed, absorbing a large amount of impact energy, avoiding direct "hard contact" between metal components.
Protecting Suspension Components: Limiting the compression limit of the suspension to prevent the shock absorber from hitting the bottom or the spring from over-compressing and getting damaged, extending the lifespan of the shock absorber and spring.
Improving Comfort and Stability: Absorbing road impacts and rapidly reducing vibrations, reducing bumps and abnormal noises, allowing the vehicle to recover stability more quickly.
Points to note
The buffer block is a vulnerable component that will age, crack, or even flake off over time. When replacing the shock absorber, it is recommended to replace the buffer block at the same time. Otherwise, the fragments of the old block may enter the shock absorber and cause oil leakage and damage.
If you notice that the buffer block has become hard, cannot spring back when pressed, or has cracks on its surface, it is time to replace it. When replacing, try to choose the original factory specification or a reputable brand. If it is too soft, it will not provide support; if it is too hard, it will lose its buffering effect.
The failure of the rear shock absorber buffer block usually refers to the aging or damage of the rear shock absorber buffer block. This is an easily worn rubber part in the suspension system, mainly functioning to buffer the impact when the shock absorber compresses to the limit, protecting the oil seal and metal components inside the shock absorber.
Main symptoms: After the buffer block cracks, it loses its buffering effect, and the metal parts collide directly, emitting a sound similar to "clicking" or a dull noise like iron hitting iron.
Hard "contact" at the rear of the vehicle when passing over bumpy roads: When passing over bumpy roads, the shock absorber stroke reaches the bottom, feeling like there is no shock absorption, accompanied by low-frequency vibrations.
Body shaking and more aftershocks: When the vehicle passes over a bump, the shock absorber bears an increased load, causing the vehicle to shake multiple times before stabilizing, resulting in a significant decline in comfort.
Reduced grip of the rear wheels: The damage to the buffer block affects the stability of the rear wheels, and on slippery roads or when driving at high speeds, it is prone to skidding or insufficient steering, resulting in poor handling.
Associated damage: After the buffer block is damaged, the shock absorber oil seal is prone to oil leakage due to hard impacts, the dust cover is damaged, allowing sand and dust to enter, accelerating the wear of the piston rod, and eventually damaging the entire shock absorber.
How to determine
Examine the appearance: Lift the vehicle and shine a flashlight around the shock absorber to check if there are any cracks, missing corners, deformation of the buffer block, or oil stains on the shock absorber body.
Press for rebound: Press one corner of the vehicle with your hand. A normal rebound should be slow and with a damping sensation; if the rebound is too fast or the vehicle shakes significantly, it indicates that the shock absorption or damping may have failed.
Listen for sounds: When passing over, hearing a "clicking" sound is usually due to rubber cracking; hearing a "clanging" metallic sound indicates that the buffer block has been severely damaged, with metal parts in direct contact.
Handling suggestions
Timely replacement: If the buffer block is found to be damaged, it should be replaced as soon as possible. Don't wait until the shock absorber is also damaged. The replacement cost is not high, but it requires disassembly and assembly of the shock absorber. It is recommended to have it done by a professional technician.
Complete replacement: The buffer block, dust cover, and top rubber often age together. It is recommended to replace them simultaneously to avoid repeated disassembly of the suspension in the short term and save time and costs.
Check the shock absorber: If the buffer block is severely cracked, remove it and press the piston rod. If there is no rebound or oil leakage from the cylinder body, it indicates that the shock absorber is also damaged and needs to be replaced together.
Choose the right material: For daily urban commuting, the original factory rubber material can be selected, as it provides better comfort and noise control; for frequent heavy loads or driving on rough roads, polyurethane material can be chosen, which offers better support.
Although the buffer block is small, its failure directly affects driving safety and comfort. When passing over potholes, there will be metal impact sounds or the vehicle body will noticeably tilt. It is necessary to go to the store for inspection as soon as possible.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.