• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HAD-2905100E-D1_Left-Front-Damper-Assembly zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:2905100E-D1

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-Left-Front-Damper-Assembly
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 2905100E-D1
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-2905100E-D1_Left-Front-Damper-Assembly
HAD-2905100E-D1_Left Front Damper Assembly

Product knowledge

 

What is the left front shock absorber assembly of the car?

The left front shock absorber assembly is the complete set of shock absorption components installed at the left front wheel position. It integrates the shock absorber, spring, top rubber, bearings, etc. into one unit and can be directly replaced and installed without the need to disassemble and reassemble the spring as in the traditional method.

What components does it include?
Shock absorber body: The core component that absorbs and mitigates road shock.
Spiral spring: Supports the weight of the vehicle and cooperates with the shock absorber to suppress bouncing.
Dust cover: Protects the shock absorber rod and spring to prevent dust and moisture from entering.
Upper and lower spring pads and shock pads: Buffer the friction and impact between the spring and metal parts.
Spring seat: Fixes the position of the spring.
Bearings and top rubber: Allow the shock absorber to rotate flexibly with the steering and isolate vibrations from being transmitted to the vehicle.
Nuts and other fixing parts: Fix the entire assembly to the frame.

Why is "left front" emphasized?
The shock absorber assembly is located at four positions: front left, front right, rear left, and rear right. The bottom mounting ears (the horns connecting to the brake disc) at each position are designed differently and cannot be mixed. When replacing, it is essential to identify the left front position accurately; otherwise, it may not fit or affect driving safety.

When is it necessary to replace?
When the shock absorber's performance declines after an increase in mileage, the following situations can indicate the need for replacement:
When the vehicle has obvious residual vibrations when passing over speed bumps and the bouncing does not stop.
When the steering wheel shakes slightly at high speeds.
When the tires show irregular wear.

If only one shock absorber is damaged, it is recommended to replace the other side of the same axis at the same time to avoid inconsistent performance on the left and right sides affecting handling and braking.
The function of the left front shock absorber assembly is to absorb road shock, suppress vehicle bouncing and side roll, and support the vehicle weight. It is directly related to the ride comfort and handling stability of the vehicle.
It is located between the left front wheel and the vehicle body, being the core component of the suspension system. When encountering bumps, the damping mechanism in the shock absorber converts the repeated bouncing energy of the spring into heat energy and dissipates it, preventing the vehicle from constantly shaking like "sitting on a boat".
What does it specifically undertake?
Buffering shock: Absorbs vibrations from potholes and speed bumps, allowing the vehicle to pass smoothly.
Suppressing bouncing: Controls the rebound speed of the spiral spring after compression to prevent the vehicle from repeatedly bouncing up and down.
Stabilizing posture: Provides lateral support during turns or lane changes, reducing vehicle side roll; also shortens braking distance during emergency braking.
Protecting tires: Keeps the tires always in contact with the ground, preventing irregular wear due to excessive vibration.
Points to note
The left front shock absorber assembly usually consists of components such as the shock absorber, coil spring, top rubber, dust cover, and buffer block, forming a complete "packaged" component. If the top rubber is aged and cracked, even if a new shock absorber is installed, the looseness of the chassis cannot be eliminated. It is best to check it together during replacement.
After driving for over 50,000 kilometers, if you feel that the chassis is loose, the residual vibration when passing over speed bumps is significant, the steering wheel shakes at high speed, or the tires are unevenly worn, it is likely a signal of the degradation of the shock absorber performance. It is recommended to check it in time.
If the left front shock absorber assembly is damaged, it is not necessarily necessary to replace the entire assembly. You can first check which specific component is damaged. In many cases, the top rubber, pressure bearing, buffer rubber, or dust cover may be damaged individually. Replacing individual parts is cheaper and the effect is not worse.
First, determine where it is damaged
Top rubber damaged: There is an "clunking" abnormal sound when passing over bumpy roads. You can replace the top rubber alone.
Pressure bearing damaged: There is an abnormal sound when turning. You can replace the pressure bearing alone.
Buffer rubber damaged: It affects the rebound of the shock absorber. You can replace the buffer rubber alone.
Shock absorber core leaks oil or fails: There are oil stains on the cylinder surface, and pressing the vehicle body causes the rebound to exceed two times. This indicates that the shock absorber core has reached its lifespan and needs to be replaced with the shock absorber core or the assembly.
If the shock absorber core itself is not damaged, replacing the accessories is more cost-effective than replacing the entire assembly. The original factory usually does not provide the assembly, and replacing individual accessories can achieve a more stable effect.
Several key reminders
It is recommended to replace both sides at the same time: Replacing only one side will cause a difference in damping force between the two sides, leading to a tendency to veer when braking, affecting safety.
After replacement, it is necessary to perform four-wheel alignment: Assembly disassembly and installation will change the front toe angle and caster angle. Not doing alignment will exacerbate tire wear.
The shock absorber assembly of the front is related to spring compression. There are safety hazards. It is recommended to use special tools or have a professional technician operate it. Do not try it yourself.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products