What is the left fender assembly of the car?
The left fender assembly of a car is a complete set of mud guards installed behind the left front or rear wheel, including the fender body, fixing clips, screws and other installation components. It is not just a simple piece of plastic or rubber; instead, it is a component supplied and installed as a "assembly".
What it specifically includes:
- Fender body: The core part, usually made of rubber, engineering plastic or metal, located behind the tire, protruding about 5 centimeters beyond the vehicle body.
- Fixing components: Including clips, screws, iron plates, etc., used to firmly fix the fender to the vehicle body behind the wheel.
- May come with reflective strips: Some models have reflective strips on the fender, enhancing safety during night driving.
Its function
Anti-slip and anti-rocking: Prevent the mud, water, and sand kicked up by the tires from splashing onto the vehicle body, chassis and pedestrians, protecting the car paint from scratches and corrosion.
Protect chassis components: Reduce the erosion of mud and sand on chassis mechanical parts such as tie rods and ball joints, preventing premature rusting.
Enhance appearance: The original color or matching mudguards can enhance the overall appearance of the vehicle, making it look more harmonious.
It should be noted
The left fender assembly is a special accessory for specific vehicles. The installation holes and shapes vary for different models. When replacing it, you need to select the corresponding model-specific adapter.
During installation, simply use the original vehicle's screw holes. Usually, no drilling is required. If you are handy, you can assemble it yourself in just a few minutes.
The function of the left fender assembly of the car is to prevent mud, water, and sand splashing from the wheels from reaching the vehicle body and pedestrians, protecting the vehicle's paint surface and chassis mechanical components. At the same time, it also takes into account certain aesthetic and noise reduction effects.
Main function
Protecting the car body paint surface: The fenders protrude about 5 cm beyond the car body, which can effectively block flying stones and gravel, preventing the paint from chipping off. Especially for the small stones carried by the tire treads, if they are thrown onto the car body at high speed, it is likely to cause damage.
Preventing rust on the chassis and mechanical components: Blocking mud and water from splashing onto the tie rods, ball joints, etc., avoiding premature rusting and extending the service life.
Maintaining the car body cleanliness: Reducing the splashing of mud and water onto the side skirts and bottom of the car doors, making the car cleaner and making it less likely for passengers to dirty their clothes when getting in or out.
Improving driving safety: Reducing the splashing of mud and water in rainy weather, lowering the probability of the rear windshield being contaminated by the splashed water, and the actual measurement shows that it can reduce by about 60%.
It should be noted
The size of the mudguards is not necessarily larger is better. If the area is too large, it will increase the wind resistance and noise at high speeds. If the distance from the ground is too low, it is easy to collide and deform when crossing bumps or going up steps. If you mainly drive on smooth roads in the city, installing them or not doesn't make much difference; if you often drive on rainy, muddy or sandy roads, it is very necessary to install them.
If there is a fault in the left mudguard assembly of the car, first determine what kind of damage it is: minor scratches or small cracks can be repaired by yourself, while severe fractures, breaks or deformations require direct replacement. It is not recommended to forcibly repair and use it as a makeshift solution.
First, determine the degree of damage
Minor damage: surface scratches or small cracks, which do not affect the structural strength, can be repaired by yourself.
Moderate damage: larger cracks but not completely broken, can be repaired using adhesives or plastic welding.
Severe damage: large-scale fractures, breaks, deformations, or damaged fixed positions, directly replace the assembly is more convenient.
Repair methods
Small crack repair: clean the damaged area, apply automotive repair glue or epoxy resin, wait for it to cure, and then use fine sandpaper to smooth it.
Moderate crack opening: use a plastic welding gun to weld, or use hot melt glue to stick, and ensure the fixation is secure before reinstalling.
DIY temporary solution: if the crack is not too large, you can also use clips or iron wires to mechanically fix it, but this is only suitable for temporary solutions and is recommended to replace it in the long term.
Replacing the mudguard assembly
Prepare tools: cross-head screwdriver, wrench, jack (possibly for the rear wheel), and a new mudguard that matches the vehicle model.
Remove the old plate: turn the steering wheel to stop the front wheels, unscrew the fixing screws and clips, be careful not to scratch the car paint surface.
Clean the installation area: remove the residue of the old plate, rust, and ensure the new plate fits tightly.
Install the new plate: align the holes first, screw in the bolts for initial fixation, then tighten evenly, do not apply excessive force to avoid deformation.
Check: after installation, confirm it is secure, the tire clearance is appropriate, and test drive for a short distance to see if there are any abnormal sounds or friction.
If there is oil seepage at the left front wheel mudguard position, it is likely not a problem with the mudguard itself, but it may be a problem with the shock absorber. This should be checked as soon as possible, and it should not be treated as a mudguard problem alone.
Avoid further damage
When driving, be careful not to excessively scrape the curb, regularly check the fixing screws and overall condition of the mudguard, and handle cracks in time, don't wait until it is completely missing to deal with it.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.