• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HA5HA-6209100-Rear-door-limiter-assembly zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:6209100

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HA5HA-Rear-door-limiter-assembly
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 6209100
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HA5HA-6209100_-Rear-door-limiter-assembly
HA5HA-6209100_ Rear door limiter assembly

Product knowledge

 

What is the car front door limiter assembly?

The car front door limiter component is a small device installed between the door and the body, used to limit the opening and closing angle of the door. Its main function is to prevent the door from opening too wide and hitting nearby objects, and also to allow the door to stop at a certain angle on slopes or when exposed to wind without automatically closing.

What does it look like?
It is typically a metal arm (limiter arm) connected to a fixed bracket and a limiter box, with rubber or plastic damping blocks on it. When opening the door, you can see it like a "small arm" resting in the gap between the door, and the metal rod has different height grooves for creating a sense of position.
Common types
Rubber spring type: Simple structure, low cost, most commonly used in economy cars. It generates resistance by the rubber blocks sliding and deforming on the limit arm. Generally, there are two or three gears, with the maximum opening angle below 70 degrees.
Spring torsion type: Low noise, long lifespan, good limit effect, common in European brand cars. It achieves limit by the deformation of the torsion bar. The maximum opening angle is approximately 60-65 degrees.
Electronic/electric type: More commonly used in high-end intelligent electric vehicles. It precisely controls the opening angle through the motor and sensors, and can integrate functions such as anti-clamping and slope parking.
What happens when it breaks?
The most typical manifestation is a creaking sound when opening or closing the door, or the door not stopping - it closes by itself at a certain angle, or opens all the way without any sense of gears. This is usually caused by the wear of the internal damping block or the aging of the spring.
Daily maintenance
You can handle it yourself: Clean the metal rod, apply silicone-based lubricant or car door lubricant, and open and close the door several times to ensure even lubrication. Do not use grease or engine oil, as they are too sticky and prone to picking up dust. The recommended maintenance cycle is every 6 months or after 2-3 ten thousand kilometers of driving.
The function of the car front door limit device assembly is mainly to limit the maximum opening angle of the door and keep the door open at the required angle, preventing the door from opening too wide and hitting walls, other vehicles or pedestrians, and also avoiding the door suddenly closing automatically on slopes or in windy conditions.
Specific functions
Limit maximum opening angle: Prevent the door from opening too far, avoiding damage to the door hinge or collision with surrounding objects.
Multiple gear positions for keeping open: Common limiters have 2-3 gears, allowing the door to stop at positions such as slightly open, half open, and fully open, making it convenient for getting in and out of the vehicle.
Protecting the vehicle body sheet metal: Avoid direct collision between the door frame and the vehicle body, reducing scratches and abnormal sounds.
Improving safety: When parking in a narrow space, the door will not suddenly swing open and hit adjacent vehicles or people; in windy or on a slope, the door will not automatically close and catch people.
Common types
Rubber spring type: Simple structure, low cost, widely used in economy cars. The maximum opening angle is generally below 70 degrees.
Spring type: Integrated with the hinge, low noise, long lifespan. Common in European brand models. The maximum opening angle is approximately 60-65 degrees.
Electronic/electric type: Mostly used in high-end intelligent electric vehicles. It can precisely control the opening angle and also integrates functions such as anti-collision, slope suspension, and personalized memory.
Daily precautions
The limit device may produce abnormal sounds (lack of lubrication or wear) or weakened limit feeling (aging of internal springs, rubber blocks). It is recommended to clean the rotating shaft every 6 months or after 2-30,000 kilometers of driving and apply special lubricating grease; if the arm rod is deformed, broken, or the problem persists after lubrication, the assembly needs to be replaced. Pay attention to selecting a model that matches the original vehicle.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products