The function of the left rear wheel housing assembly of the car
The core function of the left rear wheel housing assembly of the car is to protect the wheel, the body and the chassis components, while also taking into account noise reduction, splash prevention and aerodynamic performance.
Main function
Washing off mud and flying debris: Prevent the mud, stones, ice and snow thrown up by the rear wheels from splashing onto the vehicle body, pedestrians and components such as the tie rods and ball joints, to avoid rust and damage.
Protecting the vehicle paint surface: Reduce the direct impact of flying debris on the vehicle's paint surface, lowering the risk of scratches and damage.
Reducing tire noise: Some models have sound-absorbing cotton or plush treatment on the inner side of the wheel cover, which can absorb the noise from tire rolling and improve the interior quietness.
Optimizing aerodynamics: Guide the airflow near the wheels, reduce wind resistance, and provide certain assistance to range and high-speed stability.
It should be noted
If the wheel cover is damaged or loose, it is recommended to replace or tighten it in time. Otherwise, abnormal noises may occur during driving and the protective function may be lost.
When replacing, it is not necessary to use original factory parts, but a qualified product that matches the vehicle model should be selected to ensure a secure installation.
For the left rear wheel cover component failure of the car, the most common issues are the tearing or cracking of the inner lining (mud guard) of the wheel cover, followed by poor contact of the wiring plug and problems with the braking system. The specific causes and troubleshooting directions are as follows:
Common Fault Types
Cracking/Splitting of the Inner Lining: During high-speed driving or on rough roads, the inner lining may be scratched by foreign objects or age and crack. After cracking, it rubs against the tire and produces abnormal noises. Some car owners reported that the inner lining of the left rear wheel cover of the Ideal L6 cracked, and the manufacturer refused to compensate citing "impact caused", requiring a strong argument.
Poor Contact of Wiring Plug: If the connection between the wiring plug (such as C0376/C0390) at the left rear wheel cover and the vehicle frame is poor, it will cause alarm for suspension faults, abnormal fuel level display, etc. Cleaning the plug can solve the problem.
Brake System Issues: Water dripping from the left rear wheel cover may indicate a brake system failure. It is necessary to check the brake pads, brake discs, and brake fluid lines.
Manufacturing Defects of the Wheel Cover: Defects such as wrinkling, cracking, and roughing during the production of the wheel cover may occur, but these problems are usually resolved before leaving the factory. Later failures are mostly caused by external forces or aging.
Inspection suggestions
Let's first look at the types of abnormal sounds: The "clattering" sound during driving is usually caused by the loose inner lining; the "clicking" sound might be due to the aging of the suspension rubber sleeve; the "buzzing" sound indicates tire wear or bearing issues.
Check the condition of the inner lining: After parking the vehicle safely, shake the inner lining of the left rear wheel with your hand to see if it is loose, torn, or has any foreign objects stuck in it.
Pay attention to the warning messages: If the instrument panel shows a suspension fault, prioritize checking whether the wiring connector at the left rear wheel cover is loose or oxidized.
If the inner lining cracks but there are no impact marks, the manufacturer should be responsible for the claim. Don't easily accept the statement of "caused by external force", and you can ask the after-sales service to record the reason in the work order and keep it.
If the left rear wheel cover assembly is damaged, the most reliable way to handle it is to replace it promptly. Don't delay. It mainly protects against sand, stones, and debris, and protects the chassis and suspension. If it is damaged, it is easy for debris to accumulate and cause abnormal sounds, which will have a long-term impact on the chassis.
First, determine the damage situation
Minor cracks or partial detachment: You can temporarily fix it with hot melt glue or special glue.
Tearing, deformation, or broken screw fixation position: It is basically necessary to replace the new part. Hard repair has poor results and will still make abnormal sounds in the future.
If the damage is caused by an accident collision and the vehicle insurance covers vehicle damage, you can contact the insurance company for claims first. Don't repair it yourself directly.
After replacement, make sure the technicians tighten all the screws well. Otherwise, the vehicle will still shake on the road and the screws may loosen.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.