• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HA5HA-540119070_Left-rear-door-lock-ring-installation-seat-assembly zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:540119070

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HA5HA-Left-rear-door-lock-ring-installation-seat-assembly
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 540119070
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HA5HA-540119070_Left-rear-door-lock-ring-installation-seat-assembly
HA5HA-540119070_Left rear door lock ring installation seat assembly

Product knowledge

 

The function of the component for installing the lock ring of the left rear door of the car

The component for the left rear door lock ring mounting seat is a key structure that fixes the door lock ring (lock mechanism). Its main function is to ensure that the door can be reliably locked and remain in the closed position. It is installed on the vehicle door frame, providing a stable mounting base for the lock ring. When the door is closed, the lock block (catch hole) on the door will accurately strike and engage the lock ring, achieving a tight closure of the door.
Core function
Provide a stable installation foundation: The mounting base will firmly fix the lock ring on the vehicle door frame, bearing the repeated impact force during door closing, and preventing the lock ring from loosening or shifting.
Ensure locking accuracy: The position and angle of the mounting base determine the matching accuracy between the lock ring and the door lock block. After proper installation, the lock block can accurately engage with the lock ring, ensuring the door closes tightly and without loosening.
Distribute force and protect the vehicle body: The vibration during door closing and driving will be transmitted through the lock ring to the mounting base. The mounting base will distribute the force to the vehicle structure, avoiding excessive force on a certain area that may cause sheet metal deformation or cracking.
Cooperate with the door lock system for linkage: The lock ring and the door lock block, door lock pull rod, central lock motor, etc. work in coordination to achieve functions such as remote unlocking, interior unlocking, and central linkage.
Installation and maintenance precautions
The tightening sequence of the lock ring installation bolts is important. Generally, it follows the "upper side pre-tightening → lower side tightening → upper side final tightening" A-B-A sequence, which can evenly distribute the force and avoid excessive force on a certain area that may cause sheet metal deformation.
If you find that the left rear door does not close tightly, there is abnormal noise, or the locking is not smooth, first check if the mounting base of the lock ring is loose, deformed, or positionally offset. Adjust or replace it in time.
The left rear door lock ring mounting base component failure is usually manifested as the door not locking, not closing tightly, or abnormal noise during driving. The core reason is mostly that the lock ring (lock catch) position is offset, the mounting base is loose, or the components are worn.
Don't rush to remove the door panel. Follow the order from simple to complex for troubleshooting. In most cases, you can handle it yourself.
Perform two quick checks
Check if the lock ring is loose: Open the left rear door and find the lock ring (metal U-shaped ring) on the vehicle door frame. Shake it with your hand or use a wrench to check if the fixing screws are loose. If the screws are loose, tighten them directly, and the problem is likely to be resolved.
Check if the lock ring is worn or offset: The lock ring may wear out over time or the installation position may shift, causing the lock block to bite less tightly, closing the door with difficulty, or making a "clang" noise during driving. Check if there are any obvious wear marks on the lock ring surface. If so, consider replacing the thicker lock ring and adjusting the position.
Common fault causes and handling
Lock ring position offset: The lock ring is not installed accurately, causing the door not to close tightly or not to lock. Use an internal hex socket wrench to loosen the lock ring fixing screws, adjust the position up, down, inside, or outside until the door closes tightly and locks smoothly, then tighten the screws.
Lock ring or mounting base wear: Long-term opening and closing of the door causes wear on the lock ring and deformation of the mounting base, resulting in a larger gap between the lock block and the lock ring, making the door closing sound weak or causing abnormal noise during driving. Replace the thicker lock ring or repair the mounting base to solve the problem.
Internal fault of the door lock block: If the lock ring is fine, the problem may be in the lock block (lock mechanism) inside the door. Damage to the internal motor, or insufficient lubrication of the lock block can all cause the door not to lock or open. This situation requires checking the wiring and door interior panel or directly replacing the lock block assembly.
Line or fuse problems: If the left rear door lock has no response at all, it may be due to poor contact of the central lock wiring, aging and corrosion of the wiring harness, or a blown fuse. Check if the wiring plug at the connection point between the door and the vehicle body is oxidized or loose, and then check the fuse.
Before removing the door interior panel, first confirm if the child lock was mistakenly activated. The left rear door is common for child locks. If you can't open it from the inside but it works from the outside, it means the child lock was opened, and you can simply turn it back. If you still can't solve it after your own troubleshooting, it is recommended to find a professional auto mechanic to use a diagnostic tool to read the fault code or directly replace the lock block assembly to avoid further disassembly and assembly causing more damage.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products