• head_banner
  • head_banner

BYD-SWEETY PLUS DM-i Auto Parts HA5HA-530132970-Front-right-longitudinal-beam-front-assembly zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD-SWEETY PLUS DM-i Auto Parts

Products Oem No:530132970

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HA5HA-Front-right-longitudinal-beam-front-assembly
Products Application BYD-SWEETY PLUS DM-I AUTO PARTS
Products Oem No 530132970
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HA5HA-530132970_-Front-right-longitudinal-beam-front-assembly
HA5HA-530132970_ Front right longitudinal beam front assembly

Product knowledge

 

The function of the front components of the left front longitudinal beam of the car

The main function of the front component of the left front longitudinal beam of the car is to bear the body structure, transfer and absorb collision energy, and protect the passenger compartment during frontal collisions. It is located below the engine compartment and is one of the strongest skeletons of the vehicle body. It usually works in conjunction with the impact bar and energy absorption box.
Core function
‌Support and Bearing‌: Supports the vehicle body and maintains the equal width of the frame front and rear, ensuring the stable installation positions of components such as the engine and transmission, and also bearing the vertical, horizontal and torsional stresses during driving.
‌Collision Energy Absorption‌: During a frontal collision, the front longitudinal beam absorbs most of the impact energy through preset deformation and distributes the remaining force to other parts of the vehicle body to prevent the impact from directly reaching the passenger compartment.
‌Force Transmission Path‌: Forms a "buffer - diversion - bearing" three-level mechanism with the impact beam and energy absorption box. The impact beam and energy absorption box take effect first in low-speed collisions; in medium-high-speed collisions, the longitudinal beam participates in deformation to absorb energy and protect the occupants inside the vehicle.‌
Maintenance Precautions
If the left front longitudinal beam has been repaired in a collision, the original factory rule-arranged circular spot welding will turn into continuous weld scars or putty repairs, which will weaken its strength and affect the subsequent collision safety.
After replacing or repairing the longitudinal beam, it may affect the engine installation position and driving stability, and in severe cases, it may also affect the vehicle lifespan.‌
‌Fault Impact
‌Reduced Driving Stability: Deformation of the longitudinal beam may cause the vehicle to veer, shake at high speeds, and have abnormal swaying during sudden acceleration or braking.
‌Damaged Suspension and Steering System‌: The front part of the longitudinal beam connects the suspension, sub-frame and steering mechanism. Deformation will change the four-wheel alignment parameters, causing tire wear imbalance, steering pump leakage and other chain problems.
‌Decreased Collision Safety Factor‌: The repaired longitudinal beam cannot fully restore the original factory strength. During a second collision, the risk of deformation of the passenger compartment will significantly increase. Data shows that vehicles with unprofessionally repaired longitudinal beams may have a 30% reduction in occupant protection efficiency during a second collision.‌
Handling suggestions
Don't rush to start driving yet: If the fault is accompanied by obvious deviation, abnormal noise or abnormal suspension parameters, it is recommended to stop driving immediately and contact a professional repair agency for inspection.
Perform three-dimensional measurement assessment: Use professional equipment to measure the deformation of the crossbeam and compare it with the original factory parameters. The deformation should be controlled within ±1.5mm to be within the safe range. If it exceeds this, it needs to be repaired.
Choose a solution based on the degree of damage:
Minor deformation: Hydraulic correction plus local reinforcement. After repair, perform four-wheel alignment.
Moderate deformation: Requires cutting and welding or local replacement. After welding, a flaw detection test must be conducted.
Severe deformation: Directly replace the crossbeam assembly. This is more cost-effective but more reliable.
After repair, dynamic testing must be conducted: Drive for more than 200 kilometers. Focus on checking high-speed stability, straight-line braking performance, and for any abnormal noises.
Once the crossbeam has been cut, welded, or deformed due to folding, it will be recognized as an accident vehicle according to the used car appraisal standards. The residual value of the vehicle will significantly decrease when it is sold later. When repairing, be sure to choose a certified professional repair agency and use original factory high-strength steel plates. Don't seek cheap options and choose roadside shops.

‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products