The function of the mounting bracket for the left combination rear lamp of the car
The installation bracket for the left combination rear lamp is primarily designed to securely fix the rear combination lamp on the vehicle body while ensuring accurate light beam angles. Specifically, it serves several functions:
Fixation and Support: As the "base" of the lamp assembly, it securely holds the integrated rear combination lamp, including brake lights, reverse lights, and turn signals, on the vehicle body to prevent loosening or detachment during driving.
Positioning and Adjustment: The accuracy of the bracket directly determines the position and angle of the lamp assembly, thereby affecting the light axis and the illumination range. If the bracket is deformed (even by just a millimeter), it may cause the light beam to deviate, thereby affecting driving safety.
Buffering and Shock Absorption: The bracket reduces the impact of vehicle vibrations and shocks on the lamp assembly, preventing internal components from being damaged or loosened due to long-term vibration.
It should be noted that if the vehicle has experienced a rear-end collision or the bracket has aged and deformed, even if the lamp cover appears intact, the internal installation bracket may have shifted, resulting in inaccurate light angles, and repairs may easily be misdiagnosed as a problem with the bulb or wiring.
The left combination rear lamp installation bracket failure depends on the extent of the damage: Minor cracks can be repaired by attempting to use strong glue, resin bonding, or welding. This method is cost-effective and allows for the retention of the original vehicle parts.
If the bracket is broken or severely deformed, it cannot ensure the stability of the rear lamp. Continuing to use it poses risks of loosening or water ingress, and it is recommended to replace the new bracket instead of relying on makeshift repairs.
When dealing with this issue, follow these steps:
First, assess the extent of the damage: Minor cracks or looseness can be repaired by using strong glue, resin bonding, or welding. This method is cost-effective and allows for the retention of the original vehicle parts.
If the bracket is broken or severely deformed: The bracket cannot ensure the stability of the rear lamp. It is recommended to replace the new bracket rather than relying on makeshift repairs.
There is an overlooked point: Such bracket failures are not necessarily caused by a collision. Thermal stress from repeated expansion and contraction of the vehicle's lights, as well as pre-tightening stress from screws during assembly, can also cause the plastic bracket to crack or deform over time. Initially, it may only show as a minor crack that is difficult to detect with the naked eye.
Repair or Replacement:
Repairable cases: If the crack is not large and the bracket's main body has not deformed, using professional glue or welding for repair can ensure strength and save money.
Replaceable cases: If the bracket is broken, the clips are cracked, or it still shakes after repair, it is recommended to replace the entire bracket or the bracket itself. This is more reliable.
Processing Steps:
First, inspect: Remove the rear lamp area to check the crack location of the bracket, whether it is deformed, and confirm if the lamp housing has cracked as well.
Minor damage: Clean the damaged area, fill and bond it with weather-resistant strong glue or resin, and wait for the glue to fully cure (usually 24 hours) before reinstalling.
Severe damage: Purchase a bracket that matches the original vehicle model (preferably an OEM part). Remove the old bracket, install the new bracket at the original position and tighten the screws, then adjust the position of the rear lamp and test the light.
Additionally, this bracket can usually be replaced individually, without the need to replace the entire tail light assembly, unless your car's lights and bracket are of an integrated design.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.
