• head_banner
  • head_banner

BYD Seal 05 DM-i‌ Auto Parts HAD-5605210-Luggage-Lid-Lock-Ring_S00666 zhuo meng China accessory spare chinacar parts mg catalog manufacturer

Short Description:

Products Application:BYD Seal 05 DM-i‌ Auto Parts

Products Oem No:5605210

Lead Time: Stock, If Less 20 Pcs, Normal One Month

Payment: Tt Deposit

Company Brand: CSSOT


Product Detail

Product Tags

Products information

Products Name HAD-Luggage-Lid-Lock-Ring_S00666
Products Application
BYD Seal 05 DM-i‌ Auto Parts
Products Oem No 5605210
Org Of Place MADE IN CHINA
Brand CSSOT / RMOEM / ORG / COPY
Lead Time Stock, If Less 20 Pcs, Normal One Month
Payment Tt Deposit
Company Brand CSSOT
Application System Chassis System 
HAD-5605210_-Luggage-Lid-Lock-Ring_S00666
HAD-5605210_ Luggage Lid Lock Ring_S00666

Product knowledge

 

What is the car trunk lid lock ring?

The car luggage compartment lid lock ring is the mechanical unlocking device on the inner side of the trunk lid, usually near the lock core. The most common forms are pull rings or pull ropes.
Its main functions are:
Emergency escape: When the vehicle is submerged, collides and causes the door to deform and jam, or the electronic system loses power, pulling this lock ring from the inside can mechanically unlock the trunk lid and escape through the trunk.
Backup opening: When the electronic lock of the trunk fails and cannot be opened, it can also be manually unlocked through it. Some models can even open the fuel tank cover.
This device is a purely mechanical structure that does not rely on circuits and can be used even if the entire vehicle loses power. The forms may vary, some have pull rings, some have crescent-shaped switches, and some require opening a small cover plate to turn the lock core inside. Some even have a fluorescent feature for easier finding in the dark.
Not all models are equipped with this device. It is recommended to check the vehicle manual or look inside the trunk lid to confirm the position and operation method of the lock ring for your specific vehicle. Only then can it be used in an emergency.
The general operation process is: recline the rear seats → enter the trunk → find the lock ring and pull it → the trunk lid will pop open.
The core function of the car luggage compartment lid lock ring is to "fix and lock the items inside the trunk", preventing items from shaking or scattering during driving.
Specifically, it has the following uses:
Fixing items: Use a rope or strap to pass through the lock ring and secure luggage or backpacks to avoid items colliding during sudden braking or turns.
Hanging accessories: Can be used to hang trunk-specific fixing nets or mesh bags to separate items and reduce shaking.
Fixing long items: When transporting bicycles or ski boards, use the lock ring to fix one end to prevent sliding.
Fixing spare tires: Some vehicles, after changing the spare tire, will use the lock ring in combination with a tool strap to fix the original tire.
In simple terms, the lock ring is an "anchor point" that makes the items in the trunk more stable.
The most common cause of failure of the car luggage compartment lid lock ring is that the lock ring is loose or shifted, causing the trunk lid to not close, lock improperly, or have abnormal closing sounds.
You can first check the following steps to troubleshoot:
Check if the lock ring is loose or shifted: If the lock ring's fixing screws are loose or its position is off-center, it will cause the lock ring not to align properly and make it difficult to close. Use a screwdriver to gently move the lock ring to align it with the lock block; if the screws are loose, loosen them first, let it automatically return to its original position, and then re-tighten them.
Clean up foreign objects and lubricate: If dust or debris gets stuck in the lock ring or lock core area, it will also affect the closure. Use compressed air to blow off the debris, and spray some WD-40 on the lock hook for lubrication. Then, open and close the trunk several times to allow the oil to distribute evenly.
Check the height of the buffer block: If the buffer block is deformed or too high, it will block the lock ring's rebound, and the spiral type can be adjusted in height. If it is broken, replace it directly.
Observe the sound when closing: When closing normally, the lock will "suck" once. If it only makes a "pop" sound without resistance, it indicates that the lock ring may have a problem.
If all of the above have been tried and it still doesn't work, it may be due to hydraulic rod leakage, overly hard springs, or vehicle deformation causing the latch to not align properly. In such cases, it is recommended to seek professional inspection as soon as possible. Do not force the closure.

‌‌If you want to know more, keep reading the other articles on this site!

Please call us if you need such products.

Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.

certificate

certificate
certificate1
certificate2
certificate2

Company / Exhibition Information

详情页2024

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products