What is the car dishwasher nozzle assembly?
The "dishwashing kettle neck assembly" mentioned in "automobile dishwashing kettle neck component" should be a mistake for "washing kettle" (which is the glass water kettle). The washing kettle neck assembly is the neck structure on the kettle that connects the kettle body and the filling port, used to hold the glass water and facilitate filling from the filling port.
Components: It usually includes the kettle body connection part, the diverter pipe, the kettle neck sleeve, and the kettle neck connection unit. The kettle neck sleeve is fixed to the vehicle body, and the diverter pipe is responsible for directing water into the kettle body.
Function: It ensures a reliable connection between the kettle body and the filling port, makes assembly simple, and also serves as a seal and an anti-leak protection.
Actual position: The blue or green cover with a spray water pattern that is opened when adding glass water, below is the kettle neck; generally, add it to the mark line of the kettle neck or when the liquid level is 1-2 cm below the neck, do not add too much.
If the kettle neck assembly is broken (such as leaking or the cover not being tightened), usually a complete washing kettle assembly needs to be replaced, which is a bit troublesome to do yourself. It is recommended to go to a repair shop for handling.
The kettle neck assembly of the car washing kettle mainly serves to connect and seal the filling port, and is the key part of the glass water filling channel. The kettle neck connects the internal and external filling ports of the kettle body, allowing you to conveniently add glass water; at the same time, through the sealing structure, it prevents liquid leakage or dust from entering.
Specifically, the kettle neck assembly has several practical functions:
Connecting the filling port: The kettle neck above connects the filling port cover on the vehicle head, and below connects the kettle body, which is the necessary passage for adding glass water.
Sealing and preventing leakage: There are sealing rings or ring-shaped protrusions and other structures between the kettle neck and the kettle body, preventing water from leaking at the connection point and avoiding foreign substances from entering the kettle.
Stable assembly: There are positioning and limiting structures between the kettle neck and the kettle body, and after installation, it will not loosen or rotate, ensuring the stability of the filling tube.
Simple understanding: The kettle neck is the "bottle mouth" section of the glass water kettle, it should be easy to screw the cover and pour water, and should not leak or get dirt. If the kettle neck seal is not good or damaged, common problems include spillage when adding glass water, leakage around the kettle mouth, and in severe cases, leakage of the washing liquid or failure of the wiper to spray water. During daily use, as long as there are no leakage marks near the filling port, there is no need to pay special attention to it.
The "dishwashing kettle" should be a "glass water kettle", and the failure of the kettle neck assembly usually manifests as leakage, weak water spraying or no water spraying at all. The core reason is that the kettle neck seal is not tight, the pipe interface is loose or the kettle body is cracked. Don't rush to replace the entire assembly; follow the steps below to troubleshoot.
Troubleshooting steps:
Check the kettle neck seal ring: There is a rubber seal ring between the kettle neck and the kettle cover, aging or displacement can cause leakage. Re-tighten or replace the seal ring.
Check the water pipe interface: If the rubber pipe connecting the kettle neck is loose, bent or cracked, water pressure will be lost. Re-insert and straighten the pipe.
Check the nozzle and motor: If the kettle neck is fine but there is no water spraying, it may be that the nozzle is clogged by impurities (use a fine needle to clear), or the water spraying motor is faulty (no buzzing sound means check the fuse).
During the northern winter when the temperature is low, if the glass water freezes, do not repeatedly press the water spraying switch, as it is easy to burn out the motor. First, thaw it and then replace the antifreeze glass water.
Maintenance suggestions:
Do it yourself: Problems with the seal ring and pipe can be solved by yourself, with almost zero cost.
Send for repair: If the kettle body is cracked or the motor is damaged, it is recommended to go to a repair station. Replacing the entire assembly is not expensive, don't be fooled into doing a big project.
If you want to know more, keep reading the other articles on this site!
Please call us if you need such products.
Zhuo Meng Shanghai Auto Co., Ltd. is committed to selling MG&MAXUS auto parts welcome to buy.
