100% Original Factory Mg 750 Autoparts - SAIC MG RX5 Rear door glass outer strip-bright L-10226017R-10226018 – Zhuomeng

Products information

Products knowledge

How to replace the window outside bar?

1. Prepare the tools needed to disassemble the whole window glass outer bar: small word screwdriver, big word screwdriver, t-20 spline.

2. Find the outer window strip.

3, open the car door, on the side of the door, there is a small black cover, the small black cover plays a decorative role, need to be removed, will be found inside the fixed window outside the screw, take out the small screwdriver, with a small screwdriver will be the small black lid pry down, and close the small black cover. After the little black cover is removed, you can see the screw inside that holds the window outside bar. Take out the t-20 spline and use the t-20 spline to remove this screw. The removed screw should be put away for installation.

4. Remove the window outer strip. Take out the big word screwdriver, use the big word screwdriver from the window outside the edge of the bar gently pry, let the window outside the bar loose.

5. Take out the new outer window strip to be replaced.

6, according to the steps of removal and then backwards step by step to install back to complete the replacement of the window outside the bar.

OUR EXHIBITION

Good Feetback

Products catalog

Related products